- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Remote gateway Firewall
I want to create a VPN ipsec with forticlient with the firewall "fortigate 90D" for my company.
My problem is that I don't know the remote gateway of my firewall. Where is it?
Thank's (Sorry for my english)
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
if your 90D has Public address assigned on its WANx interface, then that is your remote gateway if you configure your forticlient connection.
Fortigate Newbie
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Go to http://whatismyip.com. The posted IP address more than likely will be your connection IP address. If this address is different than the address you are seeing, then you have an ISP gateway in front of your Fortigate. You will need to have that configured to pass the IPSec traffic through to your Fortigate. That is the only way this will work.
Bob - self proclaimed posting junkie!
See my Fortigate related scripts at: http://fortigate.camerabob.com
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi, This is normaly the IP Adress of your WAN Interface. Good Luck
________________________________________________________
--- NSE 4 ---
________________________________________________________
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
if your 90D has Public address assigned on its WANx interface, then that is your remote gateway if you configure your forticlient connection.
Fortigate Newbie
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks for your answer.
My WANx is assigned to a private address. I don't understand why. What I can do?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Go to http://whatismyip.com. The posted IP address more than likely will be your connection IP address. If this address is different than the address you are seeing, then you have an ISP gateway in front of your Fortigate. You will need to have that configured to pass the IPSec traffic through to your Fortigate. That is the only way this will work.
Bob - self proclaimed posting junkie!
See my Fortigate related scripts at: http://fortigate.camerabob.com
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi
I have the same problem. while I made it ipsec vpn not connected remotely . the interface wan i have it dhcp and as ip if i put this remote gateway(forticlient) .
router -> 192.168.10.x
interface wan -> 192.168.10.x (dhcp)
when I want to connect from my job with forticlient i can not
thnks
