Remote SSL VPN network is the same with the central Server network

[Dom5]

Hi All,

I have the following dilemma where the remote site is the same IP range as the head office site.

I am configuring SSL VPN to access from the remote site. 

Is there away to configure without change the central office IP range?

I tried to follow the old kb but it did not work. 

I am using Fortios 6.2.3

Dom

[Toshi_Esumi]

I'm assuming you're using tunnel mode with FortiClient. Then the problem happens on the client side since it sees the destination is on the local network. I haven't done this but I would think it would work if you assign a different subnet for the servers then set 1-to-1 VIP (you might need SNAT w/ ippool as well if the sever side needs to initiate sessions toward the client) with the real IPs, then apply them to the policy from ssl.root to the server interface.