Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Not applicable

Port range forwarding

When creating VIPs, using Port Forwarding (not Static NAT), it' s not possible to enter a range of ports - each has to be entered separately. If there is an application that uses a range of say 25 ports (ie.: 2101-2125), each of them would have to be entered separately. That' s a lot of work and clutter, where a quick fix would allow for entering ranges. Thanks, PRL
18 REPLIES 18
Not applicable

You should use the Firewall policies to allow multiple ports through on an interface. I' d only use VIP to NAT incoming traffic to an internal device which would normally use a public IP.
UkWizard
New Contributor

I think its a good idea personally, be nice to say these ports ... either in a range or a list (like a comma seperated one). Problem with using static nat each time Dean is, not many customers have that many external IP addresses and dont always want a dedicated external Ip allocated to them.
UK Based Technical Consultant FCSE v2.5 FCSE v2.8 FCNSP v3 Specialising in Systems, Apps, SAN Storage and Networks, with over 25 Yrs IT experience.
UK Based Technical Consultant FCSE v2.5 FCSE v2.8 FCNSP v3 Specialising in Systems, Apps, SAN Storage and Networks, with over 25 Yrs IT experience.
Not applicable

I would agree with this. There are $40 firewalls (as well as comparable firewalls from competitors) that can do this much more easily than FortiOS 2.80. I' d love to have the ability to register ranges of port addresses when creating VIPs. Thanks. David
kevanbrown
New Contributor

The lack of this feature is causing me major headache. I want to use Vonage and have only a single public IP address off of the WAN1 interface. Vonage requires UDP 5060-5061, 53, 69, and 10000-20000. The first three are manageable as individual port forwarding virtual IPs. However, the third range of 10,001 ports is actually impossbile to accomplish in the current FortiOS (2.80 MR9) as the upper limit (according to the max value matrix) is 500 virtual IPs (although I saw 1024 as the upper limit in the FortiGate-60 administration guide; conflicting documentation).
Not applicable

I agree, there should be an option to allow for this in the VIP configuration. Currently, there are two option, one for a static port forwarding and the other giving the ability to forward an outside port to a different inside port. It would do Fortinet well to make an option between these two they currently offer. Perhaps they could call it port range forwarding. The only issue I see is the possibility of overlapping external ports for forwarding internally, but when that happens, there are other issues. Anyway you look at it, this needs to be taken care of.
Not applicable

Have run into this exact kind of problem with a couple of my customers, and another one just today. Still stuck w/ doing a static nat and drilling down the accept policy in the firewall to accomodate only the port range that the customer wants. Right now the customer has a good argument which I have no way around that is why can a Firebox 2 manufactured more than 5 years ago be able to perform this exact functionality with ease, while a Fortinet box that is on top of today' s technology fumbling over such a trivial task. Right now I believe I can get by w/ eating up an External IP cause my customer has 8 useables. But still, it' s a tough thing to make the customer realize, much less configure. I have yet to run into a customer which needs this functionality and does not have the external IP address to burn up. But if we do run into one, they only have one choice, and that' s to go with a different firewall solution. I hope Fortinet puts this feature in which I recall being requested even in v2.36, much less 2.80... If your customer needs to do a port range to multiple internal servers, better hope they have quiet a large IP address pool on their external network assigned to them by their ISP...
Not applicable

I have the same problem, had to eat an extra ip. This was a simple task in the old DFL-700. Why can' t this be fixed ?
Not applicable

[Deleted by Admins]
Not applicable

I' m assuming Vonage is no longer an issue as MR10 seems to support port forwarding ranges - can anyone confirm Vonage/Other SIP phones work from behind a FG 2.8 MR10 unit? Thanks, TJ
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors