- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Per-ip-shaper is not working
Hi Team!
i am using per-ip-shaper for my system but on my testing system per-ip-shaper is not working...
thinking that my configuration is not correct,can you tell me my configuration is correct or not...
i am attaching my fortigate backup
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
config firewall policy edit 2 set name "aslam_testing" set uuid 1f3e037e-7f76-51e8-5b43-3942f7181aa5 set srcintf "internal" set dstintf "virtual-wan-link" set srcaddr "192.168.2.87" set dstaddr "all" set action accept set schedule "always" set service "ALL" set logtraffic all set auto-asic-offload disable set per-ip-shaper "Aslam_ip_shaper" set nat enable next
config firewall shaping-policy edit 3
set service "ALL" set dstintf "virtual-wan-link" set per-ip-shaper "Aslam_ip_shaper" set srcaddr "192.168.2.87" set dstaddr "all" next end
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
What exactly is "not working"? Can you post some measurements, please?
And post your traffic shaper config (config firewall shaper ipshaper).
Which FortiOS version?
