Just done the upgrade of 5.2 latest build on our 1500D cluster and I am no longer able to access the Virtual Server addresses from external clients just internal ones.
I have created new configurations, reboot etc and with no luck. The firewall log is just showing action as Close
Here is a sample:
edit " name HTTPS"
set uuid xxxxxxxxxxxxxxxxxxxxxxxxx
set type server-load-balance
set extip xxx.xxx.xxx.xxx
set extintf " any"
set server-type https
set http-ip-header enable
set monitor " TCP 443" " Ping Health Check"
set persistence ssl-session-id
set extport 443
config realservers
edit 1
set ip xxx.xxx.xxx.xxx
set port 443
next
edit 2
set ip xxx.xxx.xxx.xxx
set port 443
next
end
set ssl-mode full
set ssl-certificate " cert"
There is both and external to internal and internal to internal policy, and as mentioned a both the internal to internal one is working fine.
It does seem like there has been a change to stop inter zone loadbalancer access, and i sure hope it can be over written!