Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
alizares93
New Contributor

Fortiweb " was not found on this server".

Hello
I have the following issue.
I need to do a routing by http content with fortiweb, as an example
www.informacion.go.rx/vista/1_inicio
I have already made the policy in which when it finds www.informacion.go.rx it redirects to the server 10.22.130.5 through port 80.
The problem I have is that it is not finding the URL /vista on the web server since vista is located in the following route
10.22.130.5/www/vista.
In nginx as a proxy server I can add a specific route
in the proxy "proxy_pass" from where to start looking for the URL, but in fortiweb I have not been able to find it.
I hope you can help me to see if there is a way to do the same in Fortiweb

5 REPLIES 5
AEK
SuperUser
SuperUser

Hello

If I'm not misunderstanding your requirement, you need to create a URL Rewriting policy.

https://docs.fortinet.com/document/fortiweb/7.6.0/administration-guide/961303/rewriting-redirecting

While I personally try avoid it as much as I can, by making the required change directly on the back-end Web server.

AEK
AEK
alizares93
New Contributor

Hello, look, the problem is the following, because of how the web application is developed, the www/ is hidden.
Since it is behind a reverse proxy with nginx, when sending the request to the web server, it sends it to the address 10.22.55.2/www and I have noticed in fortiweb I have noticed that in fortiweb I have not seen where I can define in the pool server something similar as in nginx
I hope you can help me.

AEK

Hello Ali

In FortiWeb it is different. Such operation is not performed at pool level but you can do it via URL rewriting policy/rule.

The idea is to change any request from client like server/anything, to server/www/anything, before send it to the back-end server. URL rewriting policy can do this among other things.

AEK
AEK
alizares93
New Contributor

Hi, sorry for not responding. I tried to rewrite it but it didn't work. Do you have any material or examples that could help me with the implementation

AEK
SuperUser
SuperUser

Hello

https://help.fortinet.com/fweb/573/Content/FortiWeb/fortiweb-admin/application_delivery.htm

Hope it helps.

I didn't configure such since a couple of months, but basically the "Request Type" should be "Request Action", then you replace the requested URL by the back-end URL.

And you need to make few tests in order to tune it for your exact need.

AEK
AEK
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors