Hello all!
I installed Fortimanager VM-64 (trial version) and try to add a new Fortigate device (VM64, trial version) but no luck.
Platform of virtualization: Vmware ESXI.
I tried to initiate it from Fortimanager GUI and from Fortigate GUI.
When i enable debug on devices there are some errors:
diagnose debug enable
diagnose debug application fgfmd -1
FGFMs: cert_id<0>, sni<support.>FGFMs: set_fgfm_sni SNI<support.fortinet.com> FGFMs: Load Cipher [DES:@STRENGTH] FGFMs: before SSL initialization FGFMs: SSLv3/TLS write client hello FGFMs: SSLv3/TLS write client hello FGFMs: [__get_error:612] error=5, errno=104,Connection reset by peer.
Could anyone help with this question please ?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hey,
What are the FMG and FGT versions?
Cheers
Thank you for answer.
Versions:
Forimanager - v6.2.0-build1050 190411 (GA)
Fortigate - v6.2.0 build0866 (GA)
config log fortianalyzer setting get
Cheers
- Yes, on the same.
- No, there aren't any devices between.
Fortianalyzer ? Sure ? But i try to connect to Fortimanager.
FortiGate-node1 (setting) # get status : disable certificate :
Hey,
Thanks ,
can you please run
On FMG:
config system global get
On FGT: config system central-management get
FortiGate-node1 (central-management) # get mode : normal type : fortimanager schedule-config-restore: enable schedule-script-restore: enable allow-push-configuration: enable allow-push-firmware : enable allow-remote-firmware-upgrade: enable allow-monitor : enable serial-number : fmg : "<fortimanager-ip>" fmg-source-ip : 0.0.0.0 fmg-source-ip6 : :: local-cert : vdom : root server-list: include-default-servers: enable enc-algorithm : low
FMG-VM64 # config system global
(global)# get admin-lockout-duration: 60 admin-lockout-threshold: 3 adom-mode : normal adom-rev-auto-delete: by-revisions adom-rev-max-backup-revisions: 5 adom-rev-max-revisions: 120 adom-status : disable clt-cert-req : disable console-output : standard country-flag : enable create-revision : disable daylightsavetime : enable default-disk-quota : 1000 detect-unregistered-log-device: enable device-view-mode : regular dh-params : 2048 disable-module : enc-algorithm : high faz-status : disable fgfm-local-cert : (null) fgfm-ssl-protocol : tlsv1.2 ha-member-auto-grouping: enable hitcount_concurrent : 100 hitcount_interval : 300 hostname : FMG-VM64 import-ignore-addr-cmt: disable language : english latitude : (null) ldap-cache-timeout : 86400 ldapconntimeout : 60000 log-checksum : none log-forward-cache-size: 0 longitude : (null) max-running-reports : 1 oftp-ssl-protocol : tlsv1.2 partial-install : disable perform-improve-by-ha: disable policy-hit-count : disable policy-object-in-dual-pane: disable pre-login-banner : disable remoteauthtimeout : 10 search-all-adoms : disable ssl-low-encryption : disable ssl-protocol : tlsv1.2 ssl-static-key-ciphers: enable task-list-size : 2000 timezone : (GMT+3:00) Moscow. tunnel-mtu : 1500 usg : enable vdom-mirror : disable webservice-proto : tlsv1.2 workspace-mode : disabled
Hey,
Thanks for the update.
On FGT:
Let's set the enc-algorithm to high and try adding the FGT to FMG.
Let me know about the results
Cheers
Hi,
thanks for your help!
I changed enc-algorithm to 'default'. There isn't 'high' exactly.
As i know the trial license supports only low enc-algorithm.
FortiGate-node1 (central-management) # show config system central-management set type fortimanager set fmg "<fortimanager-ip>" set enc-algorithm default end
After changes the debug log looks a little different:
GFMs: Connect to <fortimanager-ip>:541, local <fortigate-ip>:8201. FGFMs: cert_id<0>, sni<support.>FGFMs: set_fgfm_sni SNI<support.fortinet.com> FGFMs: Load Cipher [DES:@STRENGTH] FGFMs: before SSL initialization FGFMs: SSLv3/TLS write client hello FGFMs: Cleanup session 0xcedb650, <fortimanager-ip>. FGFMs: Destroy session 0xcedb650, <fortimanager-ip>.
Hello,
Thanks for the update.
+Did you try adding it from FGT or from FMG?
+Also just for testing let's play with the "fgfm-ssl-protocol" on the FMG side.
For example, let's set it to tlsv1.0 and retry again.
Let me know about the results.
below is the setting of my FMG and FGT :
==========================================================
(global)# get admin-lockout-duration: 60 admin-lockout-threshold: 3 adom-mode : normal adom-rev-auto-delete: by-revisions adom-rev-max-backup-revisions: 5 adom-rev-max-revisions: 120 adom-select : enable adom-status : enable clt-cert-req : disable console-output : standard country-flag : enable create-revision : disable daylightsavetime : enable detect-unregistered-log-device: enable device-view-mode : tree dh-params : 2048 disable-module : enc-algorithm : low faz-status : disable fgfm-local-cert : (null) fgfm-ssl-protocol : tlsv1.0 ha-member-auto-grouping: enable hitcount_concurrent : 100 hitcount_interval : 300 hostname : FMG-08 import-ignore-addr-cmt: disable language : english latitude : (null) ldap-cache-timeout : 86400 ldapconntimeout : 60000 log-checksum : none log-forward-cache-size: 0 longitude : (null) max-running-reports : 1 oftp-ssl-protocol : tlsv1.0 partial-install : disable perform-improve-by-ha: disable policy-hit-count : disable policy-object-in-dual-pane: disable pre-login-banner : disable remoteauthtimeout : 10 search-all-adoms : disable ssl-low-encryption : enable ssl-protocol : tlsv1.2 tlsv1.1 tlsv1.0 ssl-static-key-ciphers: enable task-list-size : 2000 timezone : (GMT-8:00) Pacific Time (US & Canada). tunnel-mtu : 1500 usg : enable vdom-mirror : disable webservice-proto : tlsv1.2 tlsv1.1 tlsv1.0 workspace-mode : disabled
FGT (central-management) # get mode : normal type : fortimanager schedule-config-restore: enable schedule-script-restore: enable allow-push-configuration: enable allow-push-firmware : enable allow-remote-firmware-upgrade: enable allow-monitor : enable serial-number : "FMG-SN" fmg : "IP" fmg-source-ip : 0.0.0.0 fmg-source-ip6 : :: local-cert : vdom : root server-list: include-default-servers: enable enc-algorithm : high
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1643 | |
1069 | |
751 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.