- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
FortiGate cheatsheet FortiOS 7.4
Here you can find all important FortiGate CLI commands for the operation and troubleshooting of FortiGates with FortiOS 7.4.
System
General System Commands
|
|
get system status | General system information |
exec tac report | Generates report for support |
config, get, show, tree set, unset, append, unselec | Configuration commands |
<command> ? or tab | Use ? or tab in CLI for help |
<command> | grep [-f] | Grep command to filter outputs |
diag debug cli 7 | Shows webGUI changes in CLI |
|
|
Process Information
|
|
get system performance status | General performance infos |
diag sys top [sec] [number] Control + C to stop command | Process list Sort with P (CPU) / M (Memory) |
diag debug crashlog read | Crash log |
Network
Network Interface Information
|
|
diag ip address list | List of IPs on FGT interfaces |
diag firewall iplist list | List of IPs on VIP |
diag firewall ippool list | List of IP on pools |
diag netlink interface list | List IF with MTU & device ID |
Network Troubleshooting
|
|
get hardware nic <interface> | Interface Information |
diag ip arp list / get system arp | ARP table |
exec clear system arp table | Clears ARP table |
exec ping x.x.x.x exec ping-options <option> | Ping utility |
exec traceroute x.x.x.x exec traceroute-options <option> | Traceroute utility |
exec telnet x.x.x.x <port> exec telnet-options <option> | Telnet utility |
Integrated Iperf Utility
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
diag traffictest server-intf Iperf test directly run from FortiGate diag traffictest client-intf diag traffictest port [port] diag traffictest run -c [public_iperf_server_ip]
High Availability
|
|
Solved! Go to Solution.
- Labels:
-
FortiGate
-
Service
-
System settings
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Also, it is always better to refer to docs.fortinet.com for OS-specific commands
https://docs.fortinet.com/document/fortigate/7.4.0/cli-troubleshooting-cheat-sheet/420966/cli-troubl...
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Also, it is always better to refer to docs.fortinet.com for OS-specific commands
https://docs.fortinet.com/document/fortigate/7.4.0/cli-troubleshooting-cheat-sheet/420966/cli-troubl...
