Hello,
I have a strange issue on two Cluster (a-p mode) of 310B with the FortiOS v4.0.2,build0099,090407.
When I'm connected to the slave via exe ha manage X and I type sh I have some errors:
cmd_process_get_obj: cmf_query_update() error
When I cheched the config on each slave I have some parts missing:
sh firewall address ==> Empty
sh firewall policy ==> Empty
The debug of hatalk and hasync display the slave's file are in sync.
I tried to reboot the slaves but the issue is still present.
I checked another cluster of 310B with the version and I have not this issue.
Anyone have an idea to debug this issue or to do a manual resync ?
Thanks for your answers.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Looks like a severe config failure on the slave unit. I'd take it out of the cluster, 'exec factoryreset', format the flash disk in boot monitor, restore the firmware (ancient, ancient) when booting via TFTP and restore the few HA parameters and the hostname (conf sys global). Then reconnect to the cluster and watch the console port output.
IIRC the first patch releases of v4.0 were difficult. Took a lot of these until it became stable (if ever). Can't you just upgrade to v4.3.18 to use a known stable and bugfree firmware?
Thanks for your answer.
Il will try to replace these firewall and after I will test them with HQIP image.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1634 | |
1063 | |
751 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.