Error CLI Console

[ragnar]

Hy everybody !

I want to modify the time administrator password lockout and when i enter the following command in CLI Console

config system global set admin-lockout-threshold 1 set admin-lockout-duration 300 end is show me an error ....like this one bellow 6694: Unknown action 3 Command fail. Return code -1   What shall i do ? I have a Fortigate 90D. Thank you.  

[rwpatterson]

Welcome to the forums.

The CLI is very informative if you know how to ask it.

Type any of the preceding commands without the number at the end, but use a question mark. The firmware will tell you the available options. If they are numeric it will tell you the range allowed to be used. Give that a try.

[Toshi_Esumi]

Both are taken by our FG60D v5.4.8. Did you paste these lines together into console? Which line actually give you that error when you type them manually one line at a time?

 xxxxx (global) # get  --<snip>--  admin-lockout-duration: 60  admin-lockout-threshold: 3  --<snip>--

 xxxxx (global) # set admin-lockout-threshold 1    xxxxx (global) # set admin-lockout-threshold 3

 xxxxx (global) # show  config system global      set admin-lockout-duration 300      set admin-lockout-threshold 1  --<snip>--

[ragnar]

I have a fortigate 90d with firmware version 5.4.5. 

I change in the mode (global) with the command config global

Afther that when I enter get a message appear 

Command fail. Return code -160

 

no object in the end

When I enter set admin-lockout-threshold 1 a message appear 

Unknown action 0

When I enter show, in global mode it's appear different commands....and more, i do not have any errors What to do next ? Thank you

[rwpatterson]

ragnar wrote:

Hy everybody !

I want to modify the time administrator password lockout and when i enter the following command in CLI Console

config system global set admin-lockout-threshold 1 set admin-lockout-duration 300 end is show me an error ....like this one bellow 6694: Unknown action 3 Command fail. Return code -1 What shall i do ? I have a Fortigate 90D. Thank you.

The model number is less important than the level of firmware. Both are required for us to provide you with a more accurate answer. Please get for us you firmware version.