Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Automate WAP Reboot
Hi, does anyone know of a way I can restart/reboot a 201F series access point on a schedule? Like have it automatically bounce at 3 in the morning monthly?
Thanks very much for any help,
--mike
makatea
makatea
Labels:
- Labels:
-
FortiAP
2 REPLIES 2
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello @mtumolo_73
You can configure FortiAPs to automatically reboot when they are stuck in an AP Controller (AC) discovery dead loop.
The following CLI commands have been added to configure automatic AP reboot:
config wireless-controller timers set ap-reboot-wait-interval < integer > set ap-reboot-wait-time < hh:mm > set ap-reboot-wait-interval2 < integer > end
Ref: https://docs.fortinet.com/document/fortiap/7.4.4/fortiwifi-and-fortiap-configuration-guide/984226/co...
Is there any reason you want to reboot the APs?
Best Regards,
. . . . . . . . . . . . . . . . . . . . . . . .
Arun Kumar | TAC Engineer II
FORTINET TAC - America EAST
NSE Certified: FCA, FCF, FCP-NS, FCSS-NS
Office Hours: 9AM-6PM EST (Tue-Sat)
Contact: https://fortinet.com/support-and-training/support/contact.html
Community Forum: https://community.fortinet.com
# Is there anything Fortinet could have assisted with further, better, or differently?
# Simply request a Manager follow-up
. . . . . . . . . . . . . . . . . . . . . . . .
Arun Kumar | TAC Engineer II
FORTINET TAC - America EAST
NSE Certified: FCA, FCF, FCP-NS, FCSS-NS
Office Hours: 9AM-6PM EST (Tue-Sat)
Contact: https://fortinet.com/support-and-training/support/contact.html
Community Forum: https://community.fortinet.com
# Is there anything Fortinet could have assisted with further, better, or differently?
# Simply request a Manager follow-up
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi
In addition to @akumar02 method, the below should also work.
execute wireless-controller reset-wtp ...
You just need to configure it in a daily scheduled automation stitch.
AEK
AEK
