Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
BraddyJ
New Contributor

unable to ping beyond default gateway on new Internet connection

I have a Fortigate 200B with the latest 4.0 firmware. We use muiltiple Internet connections, two PPPoE connections that work just fine, and one new manual connection that I can' t get to work. I feel like I must be missing something really simple/stupid. The connections that are working: Port 13 (DSL01) - DHCP 63.231.68.142 / 255.255.255.255 Gateway: 207.225.112.6 Port 14 (DSL02) - DHCP 216.160.163.168/255.255.255.255 Gateway: 207.225.112.2 The connection that isn' t working: Port 15 (EoCu) - Manual 63.232.194.114/255.255.255.248 Static routes: Device distance priority gateway ip/mask Port 13 10 5 0.0.0.0 0.0.0.0/0.0.0.0 port 14 10 5 0.0.0.0 0.0.0.0/0.0.0.0 port 15 10 5 63.232.194.113 0.0.0.0/0.0.0.0 Static Settings: port 13 ping server 4.2.2.1 port 14 ping server 4.2.2.2 port 15 ping server 63.232.194.113 Routing monitor shows: type network distance gateway interface static 0.0.0.0/0 5 207.225.112.2 PPP1 static 0.0.0.0/0 5 207.225.112.6 PPP2 (no other static entries are listed for any interfaces) connected 63.231.68.142/32 0 0.0.0.0 PPP2 connected 63.232.194.112/29 0 0.0.0.0 Port 15 connected 207.225.112.2/32 0 0.0.0.0 PPP1 connected 207.225.112.6/32 0 0.0.0.0 PPP2 connected 216.160.163.168/32 0 0.0.0.0 PPP1 (why isn' t my static route default gateway listed for port 15???) From the firewall console: exec ping 63.232.194.113 comes back fine exec ping 207.109.53.142 does not come back When I connected my laptop to the same connection as port 15 I configured it like this: IP: 63.232.194.114 Subnet mask: 255.255.255.248 Default gateway: 63.232.194.113 With that configuration, I am able to ping 207.109.53.142 from my laptop. What am I missing???
21 REPLIES 21
BraddyJ

Any router policy configured?
No Policy Routes are defined on the FG
BraddyJ
New Contributor

I think I understand what you are all saying about having multiple Internet connections and using ECMP, how do I know my ping will go out that port? I also connected a computer to the switch off of the firewall' s LAN port (port16) gave it an IP address on a range that isn' t used by anything else (192.168.11.11) configured the firewall port 16 to have an additional IP of 192.168.11.1, and I am able to use rules to allow that laptop to get to the Internet over port 13, 14, or 15. However, when I tell it to go out over port 15 it can' t get anywhere. Or rather, it can ping only what the Firewall is also able to ping.
BraddyJ
New Contributor

This is what the traffic on that port looks like. It looks like a lot, but note the scale on the left.
BraddyJ
New Contributor

I' m able to reproduce this very issue on a laptop connected directly to the ISP' s router if I don' t set a default gateway on the laptop. I think the crux of this issue is that I can' t seem to get the FW to read my default gateway into the routing table from my static route. It' s like is just ignores any static route entry for that connection. Any ideas?
BraddyJ
New Contributor

Static routes:
BraddyJ
New Contributor

Static settings:
BraddyJ
New Contributor

Route monitor (note: no static entry for port 15)
BraddyJ
New Contributor

Ok, so I didn' t have any policy routes, but I started thinking: if my static routes aren' t creating a routing entry for the default gateway on port 15, perhaps I could create a policy route that would. The image below is what I just created, and it allows traffic out over that interface from the internal network over port 15! In short, this policy route fixes the problem. My question now is, why does the policy route work when a static route did not!?
Dave_Hall
Honored Contributor

In short, this policy route fixes the problem. My question now is, why does the policy route work when a static route did not!?
From what I can tell I don' t think there is anything wrong; you have enabled ECMP Weighted Load Balance, so the fgt should route traffic out port 13,14 and 15. Assuming you have all three port interfaces merged into a Zone, you could test to see if the fortigate routes traffic out port 15 by either disabling or unplugging port 13 and 14. (I wouldn' t do this during work/offic hours though.)

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
BraddyJ

From what I can tell I don' t think there is anything wrong; you have enabled ECMP Weighted Load Balance, so the fgt should route traffic out port 13,14 and 15. Assuming you have all three port interfaces merged into a Zone, you could test to see if the fortigate routes traffic out port 15 by either disabling or unplugging port 13 and 14. (I wouldn' t do this during work/offic hours though.)
I am restricting traffic to port 15 with firewall policies that limit 1 subnet to communicating over port 15. I have also tried moving the connection from port 15 to another port (11) and reconfiguring 11. Same issues. I have opened a support ticket on this issue, and will post the results to this forum for everyone’s edification. Tier 1 support couldn’t see anything wrong with the configuration either, and has upgraded the ticket’s priority and forwarded to tier 2. During the support call I learned a series of new commands including the ping trace and sniffer commands that EMNOC was talking about. We also took a look at the routing tables and routing table database. The trace and sniffer show that my testing laptop on the Intranet was successfully able to communicate with the Internet as long as the policy route was in place. Take the policy route away and the traffic from the testing laptop goes nowhere. We checked the routing tables and there is no default gateway listed for port 15 (so no wonder it doesn’t know how to get out). We checked the database and there is a static entry showing that there should be a default gateway, but it is not listed in the tables or in the kernel’s routing information. One interesting note about the kernel’s routing information though is that it shows the IPs of the network and broadcast addresses for port 15 in addition to the static IP of the port itself and the network address for that port. All entries are missing the default gateway configuration. See below:
 IASLC-FW01 # get router info kernel
 tab=254 vf=0 scope=253 type=1 proto=2 prio=0 0.0.0.0/0.0.0.0/0->207.225.112.6/32 pref=63.231.68.142 gwy=0.0.0.0 dev=57(ppp1)
 tab=254 vf=0 scope=0 type=1 proto=14 prio=0 216.160.163.168/255.255.255.255/0->4.2.2.2/32 pref=0.0.0.0 gwy=207.225.112.2 dev=56(ppp2)
 tab=254 vf=0 scope=253 type=1 proto=2 prio=0 0.0.0.0/0.0.0.0/0->207.225.112.2/32 pref=216.160.163.168 gwy=0.0.0.0 dev=56(ppp2)
 tab=254 vf=0 scope=0 type=1 proto=14 prio=0 63.231.68.142/255.255.255.255/0->4.2.2.1/32 pref=0.0.0.0 gwy=207.225.112.6 dev=57(ppp1)
 tab=254 vf=0 scope=253 type=1 proto=2 prio=0 0.0.0.0/0.0.0.0/0->63.232.194.112/29 pref=63.232.194.114 gwy=0.0.0.0 dev=8(port15)
 tab=254 vf=0 scope=253 type=1 proto=2 prio=0 0.0.0.0/0.0.0.0/0->192.168.20.0/24 pref=192.168.20.1 gwy=0.0.0.0 dev=25(IASLC-WIFI)
 tab=254 vf=0 scope=0 type=1 proto=11 prio=0 0.0.0.0/0.0.0.0/0->10.254.254.0/24 pref=0.0.0.0 gwy=0.0.0.0 dev=12(ssl.root)
 tab=254 vf=0 scope=253 type=1 proto=2 prio=0 0.0.0.0/0.0.0.0/0->192.168.1.0/24 pref=192.168.1.1 gwy=0.0.0.0 dev=9(port16)
 tab=254 vf=0 scope=253 type=1 proto=2 prio=0 0.0.0.0/0.0.0.0/0->192.168.30.0/24 pref=192.168.30.1 gwy=0.0.0.0 dev=24(IASLC-WIFIguest)
 tab=254 vf=0 scope=253 type=1 proto=2 prio=0 0.0.0.0/0.0.0.0/0->192.168.11.0/24 pref=192.168.11.1 gwy=0.0.0.0 dev=9(port16)
 tab=254 vf=0 scope=253 type=1 proto=2 prio=0 0.0.0.0/0.0.0.0/0->192.168.10.0/24 pref=192.168.10.1 gwy=0.0.0.0 dev=9(port16)
 tab=254 vf=0 scope=0 type=1 proto=11 prio=0 0.0.0.0/0.0.0.0/0->0.0.0.0/0 pref=0.0.0.0
 	gwy=207.225.112.2 flag=04 hops=0 oif=56(ppp2)
 	gwy=207.225.112.6 flag=04 hops=0 oif=57(ppp1)
 tab=255 vf=0 scope=254 type=2 proto=2 prio=0 0.0.0.0/0.0.0.0/0->192.168.1.1/32 pref=192.168.1.1 gwy=0.0.0.0 dev=9(port16)
 tab=255 vf=0 scope=253 type=3 proto=2 prio=0 0.0.0.0/0.0.0.0/0->192.168.1.0/32 pref=192.168.1.1 gwy=0.0.0.0 dev=9(port16)
 tab=255 vf=0 scope=254 type=2 proto=2 prio=0 0.0.0.0/0.0.0.0/0->63.232.194.114/32 pref=63.232.194.114 gwy=0.0.0.0 dev=8(port15)
 tab=255 vf=0 scope=253 type=3 proto=2 prio=0 0.0.0.0/0.0.0.0/0->127.255.255.255/32 pref=127.0.0.1 gwy=0.0.0.0 dev=11(root)
 tab=255 vf=0 scope=254 type=2 proto=2 prio=0 0.0.0.0/0.0.0.0/0->192.168.11.1/32 pref=192.168.11.1 gwy=0.0.0.0 dev=9(port16)
 tab=255 vf=0 scope=253 type=3 proto=2 prio=0 0.0.0.0/0.0.0.0/0->192.168.11.0/32 pref=192.168.11.1 gwy=0.0.0.0 dev=9(port16)
 tab=255 vf=0 scope=253 type=3 proto=2 prio=0 0.0.0.0/0.0.0.0/0->63.232.194.112/32 pref=63.232.194.114 gwy=0.0.0.0 dev=8(port15)
 tab=255 vf=0 scope=253 type=3 proto=2 prio=0 0.0.0.0/0.0.0.0/0->192.168.10.255/32 pref=192.168.10.1 gwy=0.0.0.0 dev=9(port16)
 tab=255 vf=0 scope=253 type=3 proto=2 prio=0 0.0.0.0/0.0.0.0/0->63.232.194.119/32 pref=63.232.194.114 gwy=0.0.0.0 dev=8(port15)
 tab=255 vf=0 scope=254 type=2 proto=2 prio=0 0.0.0.0/0.0.0.0/0->63.231.68.142/32 pref=63.231.68.142 gwy=0.0.0.0 dev=57(ppp1)
 tab=255 vf=0 scope=253 type=3 proto=2 prio=0 0.0.0.0/0.0.0.0/0->192.168.20.255/32 pref=192.168.20.1 gwy=0.0.0.0 dev=25(IASLC-WIFI)
 tab=255 vf=0 scope=253 type=3 proto=2 prio=0 0.0.0.0/0.0.0.0/0->192.168.30.255/32 pref=192.168.30.1 gwy=0.0.0.0 dev=24(IASLC-WIFIguest)
 tab=255 vf=0 scope=254 type=2 proto=2 prio=0 0.0.0.0/0.0.0.0/0->216.160.163.168/32 pref=216.160.163.168 gwy=0.0.0.0 dev=56(ppp2)
 tab=255 vf=0 scope=253 type=3 proto=2 prio=0 0.0.0.0/0.0.0.0/0->192.168.1.255/32 pref=192.168.1.1 gwy=0.0.0.0 dev=9(port16)
 tab=255 vf=0 scope=254 type=2 proto=2 prio=0 0.0.0.0/0.0.0.0/0->192.168.10.1/32 pref=192.168.10.1 gwy=0.0.0.0 dev=9(port16)
 tab=255 vf=0 scope=253 type=3 proto=2 prio=0 0.0.0.0/0.0.0.0/0->192.168.10.0/32 pref=192.168.10.1 gwy=0.0.0.0 dev=9(port16)
 tab=255 vf=0 scope=253 type=3 proto=2 prio=0 0.0.0.0/0.0.0.0/0->192.168.11.255/32 pref=192.168.11.1 gwy=0.0.0.0 dev=9(port16)
 tab=255 vf=0 scope=253 type=3 proto=2 prio=0 0.0.0.0/0.0.0.0/0->192.168.20.0/32 pref=192.168.20.1 gwy=0.0.0.0 dev=25(IASLC-WIFI)
 tab=255 vf=0 scope=254 type=2 proto=2 prio=0 0.0.0.0/0.0.0.0/0->192.168.20.1/32 pref=192.168.20.1 gwy=0.0.0.0 dev=25(IASLC-WIFI)
 tab=255 vf=0 scope=253 type=3 proto=2 prio=0 0.0.0.0/0.0.0.0/0->127.0.0.0/32 pref=127.0.0.1 gwy=0.0.0.0 dev=11(root)
 tab=255 vf=0 scope=253 type=3 proto=2 prio=0 0.0.0.0/0.0.0.0/0->192.168.30.0/32 pref=192.168.30.1 gwy=0.0.0.0 dev=24(IASLC-WIFIguest)
 tab=255 vf=0 scope=254 type=2 proto=2 prio=0 0.0.0.0/0.0.0.0/0->127.0.0.1/32 pref=127.0.0.1 gwy=0.0.0.0 dev=11(root)
 tab=255 vf=0 scope=254 type=2 proto=2 prio=0 0.0.0.0/0.0.0.0/0->192.168.30.1/32 pref=192.168.30.1 gwy=0.0.0.0 dev=24(IASLC-WIFIguest)
 tab=255 vf=0 scope=254 type=2 proto=2 prio=0 0.0.0.0/0.0.0.0/0->127.0.0.0/8 pref=127.0.0.1 gwy=0.0.0.0 dev=11(root)
  
 
 
 
 S*      0.0.0.0/0 [5/0] via 207.225.112.2, ppp2
                   [5/0] via 207.225.112.6, ppp1
 S       10.254.254.0/24 [10/0] is directly connected, ssl.root
 C       63.231.68.142/32 is directly connected, ppp1
 C       63.232.194.112/29 is directly connected, port15
 C       192.168.1.0/24 is directly connected, port16
 C       192.168.10.0/24 is directly connected, port16
 C       192.168.11.0/24 is directly connected, port16
 C       192.168.20.0/24 is directly connected, IASLC-WIFI
 C       192.168.30.0/24 is directly connected, IASLC-WIFIguest
 C       207.225.112.2/32 is directly connected, ppp2
 C       207.225.112.6/32 is directly connected, ppp1
 C       216.160.163.168/32 is directly connected, ppp2
  
 IASLC-FW01 # get router info routing-table database 
 Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
        O - OSPF, IA - OSPF inter area
        N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
        E1 - OSPF external type 1, E2 - OSPF external type 2
        i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
        > - selected route, * - FIB route, p - stale info
  
 S    *> 0.0.0.0/0 [5/0] via 207.225.112.2, ppp2
      *>           [5/0] via 207.225.112.6, ppp1
 S       0.0.0.0/0 [10/0] is directly connected, port13 inactive, [5/0]
                   [10/0] is directly connected, port14, [5/0]
                   [10/0] via 63.232.194.113, port15, [5/0]
 S    *> 10.254.254.0/24 [10/0] is directly connected, ssl.root
 C    *> 63.231.68.142/32 is directly connected, ppp1
 C    *> 63.232.194.112/29 is directly connected, port15
 C    *> 192.168.1.0/24 is directly connected, port16
 C    *> 192.168.10.0/24 is directly connected, port16
 C    *> 192.168.11.0/24 is directly connected, port16
 C    *> 192.168.20.0/24 is directly connected, IASLC-WIFI
 C    *> 192.168.30.0/24 is directly connected, IASLC-WIFIguest
 C    *> 207.225.112.2/32 is directly connected, ppp2
 C    *> 207.225.112.6/32 is directly connected, ppp1
 C    *> 216.160.163.168/32 is directly connected, ppp2
 
Labels
Top Kudoed Authors