Device Fortigate 100F, v7.4.1
Can someone help me please?
I followed this guide
https://community.fortinet.com/t5/FortiGate/Technical-Tip-SSL-VPN-access-to-multiple-VDOMs/ta-p/2237...
To create VDOMs and has their own sslvpn.
The only difference on my setup is that since I'm using SNAT instead of using the DNAT name I'm using the internal IP in the destination of the policy firewall.
https://107.xxx.186.174:10443 doesn't work. It is like fortigate is not forwarding correctly.
vdom-link0 (10.198.45.1)
vdom-link1 (10.198.45.2)
Root and the new vdom can ping both IPs above.
on root vdom:
edit 4
set name "SSLVPNFLAUNTin"
set uuid b5097f20-a692-51ee-9fe8-eb8cc2148214
set srcintf "wan1"
set dstintf "Vdom-Flaunt0"
set action accept
set srcaddr "all"
set dstaddr "10.198.45.2/32"
set schedule "always"
set service "ALL"
set logtraffic all
set groups "VPN Users"
set comments " (Copy of SSLVPNCFT)"
next
Policy on new VDOM:
edit 1
set name "SSLwebVPNin"
set uuid ea2fbc84-a695-51ee-ddb6-069ecb3f5a23
set srcintf "Vdom-Flaunt1"
set dstintf "vlan45"
set action accept
set srcaddr "all"
set dstaddr "10.198.45.2/32"
set schedule "always"
set service "ALL"
set logtraffic all
next
ROOT DNAT & VIPs:
config firewall vip
edit "FlauntSSLvpn"
set uuid e7b7f854-a6cc-51ee-26f3-10ce781f191b
set extip 107.xxx.186.174
set mappedip "10.198.45.2"
set extintf "wan1"
set portforward enable
set extport 10443
set mappedport 10443
next
end
Can you tell me what I'm doing wrong, please?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi,
Please try like this:
- on root VDOM ( internet facing VDOM ) , create a VIP for the VDOM-link interface towards VDOM-A IP ( which later will be referenced in the SSLVPN settings on VDOM-A )
e.g. inter-vdom link : root VDOM - 10.198.45.1/24 and VDOM-A - 10.198.45.2 /24 ( this last IP will be used in the VIP)
- use that VIP in the firewall rule in root VDOM : srcintf wan1 , dstintf vdom-link , srcip any, dstip VIP, NAT active ( use outgoing interface ip )
- in VDOM-A configure the SSLVPN to listen on the IP/interface of VDOM-link ( 10.198.45.2 /24 )
- in VDOM-A configure the firewall policies for SSLVPN with group etc, in order to activate the SSLVPN
This should do the trick
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1733 | |
1106 | |
752 | |
447 | |
240 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.