ssid not broadcasting

[alwazee]

Hi 

I have a fortigate 101E with v6.2.0 build0866 (GA) version. I connected two fortiap PU221E and did all the instructed configuration and all seem fine in the fiortigate but I cannot discover the signal of any SSID 

I could not identify the problem any help?

[Dave_Hall]

In the SSID (interface) configuration, check that the "Broadcast SSID" option is enabled.

Check the FortiAP profiles that are assigned to the PU221E to see if the SSIDs are assigned properly - if not set to auto then manually add the SSIDs. 

I am assuming the PU221Es are authorized on the 101E. 

If the above checks out and both Aps have valid/routeable IPs can can be seen by the 101E, check the WiFi Health Monitor and Rogue AP Monitor for possible interference.

Edit: also on the FortiAP profiles, check to see there are actual channels assigned.