Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
New Contributor

per VDOM SNMP OID's to monitor CPU, Mem etc

In case any one is interested figured out how to do per vdom snmp monitoring for CPU, mem etc


Took a bit more than finding a standard OID value, as each VDOM needs it own OID value.


Below are the main OIDs then add on the end .1 for VDOM 1. Ok so you need to find out which VDOM is number one.

I found out that you can't use the diagnose sys vd list command as it doesn't give the right info. Your best option is do a MIB walker against the firewall and this will return the vdom name against the OID


ie  SNMPv2-SMI::enterprises.12356. = STRING: "CUSTOMER2" so you know you can then use OID  adding the 2 on end as you know this is VDOM 2 now and name your graphs.


We used a standard SMNP customer OID sensor in PRTG to graph the CPU %, MEM % and session rate values


FORTINET-FORTIGATE-MIB:fortinet.fnFortiGateMib.fgVirtualDomain.fgVdInfo.fgVdNumber  FORTINET-FORTIGATE-MIB:fortinet.fnFortiGateMib.fgVirtualDomain.fgVdInfo.fgVdMaxVdoms  FORTINET-FORTIGATE-MIB:fortinet.fnFortiGateMib.fgVirtualDomain.fgVdInfo.fgVdEnabled  FORTINET-FORTIGATE-MIB:fortinet.fnFortiGateMib.fgVirtualDomain.fgVdTables.fgVdTable.fgVdEntry.fgVdEntIndex  FORTINET-FORTIGATE-MIB:fortinet.fnFortiGateMib.fgVirtualDomain.fgVdTables.fgVdTable.fgVdEntry.fgVdEntName  FORTINET-FORTIGATE-MIB:fortinet.fnFortiGateMib.fgVirtualDomain.fgVdTables.fgVdTable.fgVdEntry.fgVdEntOpMode  FORTINET-FORTIGATE-MIB:fortinet.fnFortiGateMib.fgVirtualDomain.fgVdTables.fgVdTable.fgVdEntry.fgVdEntHaState  FORTINET-FORTIGATE-MIB:fortinet.fnFortiGateMib.fgVirtualDomain.fgVdTables.fgVdTable.fgVdEntry.fgVdEntCpuUsage  FORTINET-FORTIGATE-MIB:fortinet.fnFortiGateMib.fgVirtualDomain.fgVdTables.fgVdTable.fgVdEntry.fgVdEntMemUsage  FORTINET-FORTIGATE-MIB:fortinet.fnFortiGateMib.fgVirtualDomain.fgVdTables.fgVdTable.fgVdEntry.fgVdEntSesCount  FORTINET-FORTIGATE-MIB:fortinet.fnFortiGateMib.fgVirtualDomain.fgVdTables.fgVdTable.fgVdEntry.fgVdEntSesRate  FORTINET-FORTIGATE-MIB:fortinet.fnFortiGateMib.fgVirtualDomain.fgVdTables.fgVdTpTable.fgVdTpEntry.fgVdTpMgmtAddrType  FORTINET-FORTIGATE-MIB:fortinet.fnFortiGateMib.fgVirtualDomain.fgVdTables.fgVdTpTable.fgVdTpEntry.fgVdTpMgmtAddr  FORTINET-FORTIGATE-MIB:fortinet.fnFortiGateMib.fgVirtualDomain.fgVdTables.fgVdTpTable.fgVdTpEntry.fgVdTpMgmtMask 


Hope this might be of use to someone



New Contributor

You can use the following command to get the snmp-index value of each VDOM to use in the OID:

config system vdom-property





Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Top Kudoed Authors