Hello,
I would like to setup configuration using one virtual IP to connect multiple internal IP/host. How can I do the setup?
Model: FortiWeb 1000e with firmware 6.3.1-build1056
Thank You
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi,
Ok, that is achieved using http content routing. When you create server policy, choose the deployment mode as http content routing, please see FortiWeb 5.8.3 Administration Guide - Defining your web servers (fortinet.com)
Best regards,
Jin
Hi,
Are you trying to host multiple domains on a virtual IP, and that you needed to redirect the traffic to multiple internal hosts based on domain? Could you please detail the proposed setup?
Best regards,
Jin
Yes, I would like to redirect the traffic to multiple internal hosts based on domain
WAN -> VIP -> multiple internal hosts based on domain
VIP: 192.168.10.90
Internal host: 192.168.10.91 (abc1.com) & 192.168.10.92 (abc2.com)
user from wan access to abc1.com , VIP will redirect to 192.168.10.91
user access to abc2.com , VIP will redirect to 192.168.10.92
using same VIP
Hi,
Ok, that is achieved using http content routing. When you create server policy, choose the deployment mode as http content routing, please see FortiWeb 5.8.3 Administration Guide - Defining your web servers (fortinet.com)
Best regards,
Jin
Noted. Thanks @jintrah_FTNT
One more thing, the management interface subnet cannot same with interface port 1? tried to configure both port with same subnet but there is an error
Yes, that is right, we cannot have an interface in the same subnet as defined on another one.
best regards,
Jin
May I get an explanation why cannot have same an interface in the same subnet as defined on another one?
Please refer the device administration guides on what configurations are possible and supported.
https://help.fortinet.com/fweb/554/Content/FortiWeb/fortiweb-admin/network_settings.htm states "Two network interfaces cannot have IP addresses on the same subnet."
best regards,
Jin
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1529 | |
1027 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.