Unable to add my active ISP WAN interface as SD_WAN Member to a SD_ZONE

[JOSIAH_BOZIAH]

Unable to add my active ISP WAN interface as SD_WAN Member to a SD_ZONE , the interface does not show up when adding it to a SD-WAN zone. This is for my home lab, I am  running forti os 6.4.5. my  ISP WAN 2 is down. cable is connected, because i only have 1 ISP connection, but i still assigned IP to it.  

[knagaraju]

Hello JOSIAH_BOZIAH,

Your internet connection will be interrupted as you will have to remove all the references associated with WAN1 in order to add it as an SDWAN member. 

Regards
Nagaraju.

[Tabish_Khan]

The references to the interface could be a reason but in my case, there were no references to the interface, and still, the interfaces were not showing up when adding them to SD-WAN Zone.
Here is what I did.

First, create SD-WAN Zone!

Then create SD-WAN member

Then select the interface you want to be an SD-WAN  Zone member and select the Zone you want the interface to be a member of, as shown.

This way, i was able to add interfaces to SD-WAN zone

[patelr]

Hello @JOSIAH_BOZIAH,

Have you tried to see any references related to interface using "sh full | grep <interface_name>" ?

Thanks,
Ronak Patel