Trying to access a remote server using FW public IP via VPN SSL

[ale16horizon]

Scenario: 1 PC in headquarters1 PC from home1 FW FortiGate 100E in headquarters1 VPN SSL1 remote server (outside of headquarters) that has its own public IP We need to connect to this remote server, and this server accept connections that are generated only from FW public IP.So, every connection made by PC in headquarters works fine because by default everything is seen behind FW public IP.But, the problem is when an user is from home using VPN SSL... is there a way to configure the firewall so that connections to this remote server go exclusively through the SSL VPN so that the server sees requests from the FW public IP ?Because right now, when an user is in VPN adn try to access this remote server, the user is presenting himself with the public IP of his own home

[Markus]

As I guess, you have split tunneling enabled. Just put the server public ip in your routing group (e.g. like a internal ressource).

[Markus]

Hi, and welcome to the Forums. As I guess, you have split tunneling enabled. Just put the server public ip in your routing group (e.g. like a internal ressource).

[Markus]

Hi, and welcome to the Forums. As I guess, you have split tunneling enabled. Just put the server public ip in your routing group (e.g. like a internal ressource).