We have a 524D switch, and using a 40GB breakout cable to 10GB. The FortiSwitches are managed through the Fortigate. We then have a transceiver to be plugged in to an HPE Gen 10 Server. The documentation mentions the following: "Auto-speed detection is supported on 1/10G ports, but not on higher speed ports (such as 40G)". What does this mean for the 4 x 10GB speed ports? Can they be set to Auto 10GB? The port speed on the present Cisco transceivers in the HPE Gen 10 servers are already set to 10GB auto. Also I am not understanding what the speed setting called Auto-Module is used for? We are running version 6.4 version of firmware.
And one more question regarding MTUs. If we look at the settings on the switch this is what we see. " The VLANS are set to an MTU of 1500, but the ports themselves are set to 9198". This is confusing. Does one. overide the other? Thank you
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello,
1. "Auto-speed detection is supported on 1/10G ports, but not on higher speed ports (such as 40G)". What does this mean for the 4 x 10GB speed ports? Can they be set to Auto 10GB?
Answer: The MTU size of the VLAN interface is directly proportional to the MTU size of the parent/associated interface.
As an example:
Create a 'vlan test' VLAN interface on physical interface 'Port1'.
If the 'port1' interface MTU is 9198, you can adjust the 'vlan test' MTU to be between 68 - 9198.
However, if the MTU of the 'port1' interface is 1500 and you try to set the MTU of the 'vlan test' to a value greater than 1500, you will receive the following error:
# config system interface
(interface)edit vlan_test
(vlan_test)set mtu-override enable
(vlan_test)set mtu 9170
MTU size not valid. Should be in the range of 68 - 1500.
node_check_object fail! for mtu 9170
value parse error before '9170'
Command fail. Return code -2
end
I hope this clears up certain doubts.
Thank you akileshc. Thats is good.
Hello,
1. "Auto-speed detection is supported on 1/10G ports, but not on higher speed ports (such as 40G)". What does this mean for the 4 x 10GB speed ports? Can they be set to Auto 10GB?
Answer: The MTU size of the VLAN interface is directly proportional to the MTU size of the parent/associated interface.
As an example:
Create a 'vlan test' VLAN interface on physical interface 'Port1'.
If the 'port1' interface MTU is 9198, you can adjust the 'vlan test' MTU to be between 68 - 9198.
However, if the MTU of the 'port1' interface is 1500 and you try to set the MTU of the 'vlan test' to a value greater than 1500, you will receive the following error:
# config system interface
(interface)edit vlan_test
(vlan_test)set mtu-override enable
(vlan_test)set mtu 9170
MTU size not valid. Should be in the range of 68 - 1500.
node_check_object fail! for mtu 9170
value parse error before '9170'
Command fail. Return code -2
end
I hope this clears up certain doubts.
Thank you akileshc. Thats is good.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1529 | |
1027 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.