Can anyone please help me setup a raspberry pi to create a tunnel between my office and the raspberry pi that is connected to a a mobile device for internet
However the raspberry pi network is not standard network configuration it uses the same NetworkManager as Ubuntu so that I could forward the wlan0 internet through to the eth0 as shown below:
https://raspberrypi.stack...=1#comment143993_89806
setup should look something like this:
laptop <lan> Fortinet <lan> public ip )))) internet (((( public ip <wifi> raspberry pi <lan> ethernet device
192.168.x.x 196.x.x.x Static Dynamic 192.43.x.x 192.168.x.x
I do not know how to setup the /etc/ipsec.conf file
We are using PSK which I understand goes in to the /etc/ipsec.secrets file
Fortinet config I have is as follows:
Phase 1:
AES128-SHA256,AES256-SHA256,3DES-SHA256,AES128-SHA1,AES256-SHA1,3DES-SHA1
DH GROUP 14,5
Key Lifetime = 86400
XAUTH - disabled
Phase 2:
AES128-SHA256,AES256-SHA256,3DES-SHA256,AES128-SHA1,AES256-SHA1,3DES-SHA1
DH GROUP 14,5
Enabled replay detection >
Enabled PFS
Key Lifetime seconds
Seconds 43200
Yes I have seen many other sites out there but none of them I have managed to get working hence why I am begging for help on this please...
Hi JD,
How did you go with this? I've found myself in a similar position wondering if I can configure and IPsec Tunnel that I can connect to from the Raspbian OS.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1748 | |
1114 | |
765 | |
447 | |
241 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2025 Fortinet, Inc. All Rights Reserved.