Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Mohamedvmware
New Contributor

I need to divide my users to use different 2 adsl lines from two different isp

Hi, I Have fortigate 30e and Two internet lines from different two ISp  I need to divide My users to two groups one of them use line one and the other group use second one at the same-time I don't need to configure loadblane or failover.   Thanks....
3 REPLIES 3
James_G
Contributor III

Policy based routes or vdoms
Mohamedvmware

Thanks James .

Can you help me with more details

how can i make policy based routes or vdoms 

 

JeroenK

Under network, there is a policy routes feature. If you create a new rule you will see you can use source interface, source address, source group and offcourse destination. In the destination field you should use any if you want to get a single ip, subnet or group to get a diffrent route to internet. The "then" action is the second wan interface and forward traffic. 

 

So if you create a new rule, you use a group to route to second wan interface, fill in the "then" fields, you're almost good to go. You need to make sure that there are also firewall rules to allow the traffic from lan to wan2. 

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors