Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
lequangrin
New Contributor

Fortigate 200B error - No disks available

Dear All,

- I have a Firewall 200B after update in from firmware version 5.0.0 to 5.2.9, Now it has problem is No disks available and CPU Always run 100%, My firewall don't use hard disk, I don't know why after update it's don't save log in Flash.  Please help me, How to fix it. Thank All

 

FTG200B # get sys status Version: FortiGate-200B v5.2.9,build0736,160906 (GA) Virus-DB: 45.00195(2017-03-06 03:11) Extended DB: 1.00000(2012-10-17 15:46) IPS-DB: 10.00081(2017-03-04 23:59) IPS-ETDB: 0.00000(2001-01-01 00:00) Botnet DB: 3.00327(2017-03-06 10:06) BIOS version: 04000010 System Part-Number: P05625-02 Log hard disk: Not available Internal Switch mode: switch Hostname: HQ-FTG200B-01

 

----------------------------------------

 

FTG200B # get hardware status Model name: FortiGate-200B ASIC version: CP6 ASIC SRAM: 64M CPU: Celeron (Covington) Number of CPUs: 1 RAM: 1005 MB Compact Flash: 3838 MB /dev/sda Hard disk: not available USB Flash: not available Network Card chipset: mvl_sw Ethernet driver1.0 (rev.)

Operation Mode: NAT Current virtual domain: root Max number of virtual domains: 10 Virtual domains status: 1 in NAT mode, 0 in TP mode Virtual domain configuration: disable FIPS-CC mode: disable Current HA mode: standalone Branch point: 736 Release Version Information: GA System time: Tue Mar  7 17:21:11 2017

 

-----------------------------------

 

FTG200B# diagnose hardware deviceinfo disk   Disk USB-2(boot)     ref:       3.7GB    type: USB [FORTINET FG200B_FWV071610] dev: /dev/sda   partition ref:      61.0MB,  27.0MB free  mounted: Y  label:  dev: /dev/sda1(boot) start: 1   partition ref:      62.0MB,  32.0MB free  mounted: N  label:  dev: /dev/sda2(boot) start: 131073   partition ref:   3   3.5GB,   3.5GB free  mounted: Y  label:  dev: /dev/sda3 start: 262145 ---------------------------------------------------

 

FTG200B # diagnose hardware deviceinfo flash  Mapping boot device /dev/sda to /dev/sg0 Checking spareblock on /dev/sg0... SCSI Status: Good Plane No        Spare Block Counts 1            99 2            97 Attached devices: Host: scsi2 Channel: 00 Id: 00 Lun: 00  Htid: usb-storage-0 Vendor: FORTINET Model: FG200B_FWV071610 Rev: 1610 Type:   Direct-Access                    ANSI SCSI revision: 02  

0 REPLIES 0
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors