- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Forticlient - Unable to establish vpn - IPSEC
Hello,
Okay, I am burning my head on this for the past few days
I have created an ipsec forticlient vpn on a fortigate 70d and is not able to connect. Error on windows pc goes like this
VPN Connection Failed. Please check your configuration, network conenction and pre-shared key, then retry your connection......
Forticlient log goes like this
3/24/2015 11:37:18 AM Notice VPN id=96566 msg="negotiation information, loc_ip=xxx.xxx.xxx.xxx loc_port=500 rem_ip=xx.xx.xx.xx rem_port=500 out_if=0 vpn_tunnel=New nav action=negotiate init=local mode=aggressive stage=1 dir=outbound status=success Initiator: sent xx.xx.xx.xx aggressive mode message #1 (OK)" vpntunnel="New nav" vpntype=ipsec
3/24/2015 11:37:18 AM Error VPN id=96567 msg="negotiation error, loc_ip=xxx.xxx.xxx.xxx loc_port=4500 rem_ip=xx.xx.xx.xx rem_port=4500 out_if=0 vpn_tunnel=New nav status=negotiate_error init=local mode=xauth_clinet stage=1 dir=inbound status=failureInitiator: parsed xx.xx.xx.xx aggressive mode message #1 " vpntunnel="New nav" vpntype=ipsec
3/24/2015 11:37:30 AM Warning VPN id=96561 msg="locip=xxx.xxx.xxx.xxx locport=4500 remip=xx.xx.xx.xx remport=4500 outif=0 vpntunnel=New nav status=negotiate_error No response from the peer, phase1 retransmit reaches maximum count..." vpntunnel="New nav" vpntype=ipsec
In Mac it goes like this,
Preshared key is incorrect
I know the preshared key is correct.This connection was working until 2 weeks back. Dont know what went wrong.
The fortigate log says " Action : negotiate Status: failureprogress Message: IPsec phase 1
Any help would be much appreciated.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
hi,
looking into the vpn event logs, it seems like negotations errors this would mainly happen due to mis-configuration.
-you can debug the ike (isakmp packets) from fgt
diag debug rest
diag debug console timestamp enable
diag vpn ike log-filter dst-addr4 <client_public_ip>
diag debug app ike -1
-vpn configuration.
You may follow the videos:
http://docs.fortinet.com/d/fortigate-video-ipsec-vpn
thanks,
rewanta
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi renjithmusafir - did you manage to resolve this issue? I'm having the same problem and have spent a couple of hours trying to solve it but without success.
many thanks,
Regards,
Igor
