FortiSwitch - failing to retrieve ports

[funkylicious]

Hi,

Has anyone encountered when executing a command below to get this output?

Model FSW 124F-FPOE most of them and managed via FortiLink.

diagnose switch physical-ports summary

Portname Status Tpid Vlan Duplex Speed Flags Discard
__________ ______ ____ ____ ______ _____ ____________ _________
prt_switch_phyport_summary: unable to get port1(#1) status
prt_switch_phyport_summary: unable to get port2(#2) status
prt_switch_phyport_summary: unable to get port3(#3) status
prt_switch_phyport_summary: unable to get port4(#4) status
prt_switch_phyport_summary: unable to get port5(#5) status
prt_switch_phyport_summary: unable to get port6(#6) status
prt_switch_phyport_summary: unable to get port7(#7) status
prt_switch_phyport_summary: unable to get port8(#8) status
prt_switch_phyport_summary: unable to get port9(#9) status
prt_switch_phyport_summary: unable to get port10(#10) status
prt_switch_phyport_summary: unable to get port11(#11) status
prt_switch_phyport_summary: unable to get port12(#12) status
prt_switch_phyport_summary: unable to get port13(#13) status
prt_switch_phyport_summary: unable to get port14(#14) status
prt_switch_phyport_summary: unable to get port15(#15) status
prt_switch_phyport_summary: unable to get port16(#16) status
prt_switch_phyport_summary: unable to get port17(#17) status
prt_switch_phyport_summary: unable to get port18(#18) status
prt_switch_phyport_summary: unable to get port19(#19) status
prt_switch_phyport_summary: unable to get port20(#20) status
prt_switch_phyport_summary: unable to get port21(#21) status
prt_switch_phyport_summary: unable to get port22(#22) status
prt_switch_phyport_summary: unable to get port23(#23) status
prt_switch_phyport_summary: unable to get port24(#24) status
prt_switch_phyport_summary: unable to get port25(#25) status
prt_switch_phyport_summary: unable to get port26(#26) status
prt_switch_phyport_summary: unable to get port27(#27) status
prt_switch_phyport_summary: unable to get port28(#28) status
prt_switch_phyport_summary: unable to get internal(#29) status

[AEK]

Hi @funkylicious 

Which version of FOS & FSW ?

[funkylicious]

hi @AEK , about 29 SW and ~90% have FSW 7.4.8 all exhibit the same issue and the rest have FSW 7.2.7 w/o issues, also got 2x 1024E w/ FSW 7.4.4 that also work and running FOS 7.4.9.

[BillH_FTNT]

Hi @funkylicious 

What is your FortiGate hardware model? I would like to reproduce the issue in my lab.
It will be a great help if my configuration and devices are as close as possible to yours. 

If possible, please share the key configurations with me via email at bhoang@fortinet.com.

Thank you

BIll

[funkylicious]

hi @BillH_FTNT ,

the FGT is a 200F and there's a cluster of them.

do you want the output/config of some specific commands or the export from the FGT ?