Technical Tip: Configuring the FortiGate to use th...

RBA · 08-13-2024

Description This article describes how to confirm if TCP/UDP 5060 and TCP 2000 ports are closed. Scope FortiGate. Solution The following KB article can be followed to close ports TCP/UDP 5060 and TCP 2000: Technical Tip: How to close port TCP/UDP 506...

RBA · 08-13-2024

Description This article describes how to identify the public addresses of each PoP. Scope FortiSASE. Solution A new tab Region IP Addresses is available under Configuration -> Network. Region IP Addresses would display the public IP's of each associ...

RBA · 10-30-2023

Description This article describes how to troubleshoot the NTLM authentication failure with log 'AcceptSecurityContext failed: 0x8009030c'. Scope FortiGate. Solution This article only focuses on NTLM authentication failure with the error log 'AcceptS...

RBA · 08-29-2023

Description This article describes how to troubleshoot the SSH 'REMOTE HOST IDENTIFICATION HAS CHANGED' error. Scope FortiGate. Solution SSH into the server from the client prompts 'REMOTE HOST IDENTIFICATION HAS CHANGED' every hour as below: [user@h...

RBA · 04-11-2023

Description This article describes the basic configuration steps required to integrate the Jumpcloud LDAP server into FortiGate. Scope FortiGate. Solution For the regular LDAP user to log in, the LDAP binding user has to be configured to gain access ...

RBA · 10-28-2023

Newer versions are always preferred as it would have the most recent bug fixes and features available. Please go through the known and resolved issues in the release notes to avoid hitting any known issues that would impact you network. Known Issues:...

RBA · 09-27-2023

Hello, I hope you have tried running the installer as administrator. Can you give full access to the user/administrator and try installing again.Also try this execute CMD -> run as admin Run >> sc stop fortishield >>Verify fortishield is stopped >>Cl...

RBA · 07-20-2023

Hi Pawel, Help me with the current firmware version FMG is in. If its 7.2.1/7.2.2 then as per my understanding we do not have an option to disable it however as a workaround you can create and use a new admin profile (local or remote) without read/wr...

RBA · 07-20-2023

Try with below command diagnose test authserver radius "RADIUS SERVER" mschap2 username password Server_name indicates the value of "name" field configured under FortiGate Radius Profile. Also share the output of command "sh full-configuration user r...

RBA · 07-19-2023

Hey OJazem, so what is the FortiGate model and firmware version?. Also did we try to edit/configure the policy from CLI?. To give a proper reply we would have to look into the httpsd debugs while recreating the issue. Below link can help with the err...

User Statistics

User Activity

Technical Tip: How to verify if port TCP/UDP 5060 and TCP 2000 are closed

Technical Tip: How to identify egress public IP of FortiSASE

Troubleshooting Tip: NTLM authentication failure (FSSO Fallback)

Troubleshooting Tip: SSH 'REMOTE HOST IDENTIFICATION HAS CHANGED' error.

Technical Tip: Configuring the FortiGate to use the Jumpcloud LDAP server with the CLI

Re: 7.4.1 Ready?

Re: Error trying to install FortiClient 7.2.1 on single user pc

Re: FortiManager ver. 7.2.x

Re: Unable to connect to my Radius Server . Test connectivity settings on Fortigate primary server f

Re: FortiGate failed to create policies through VPN

Technical Tip: Configuring the FortiGate to use th...

Technical Tip: How to identify egress public IP of...

Troubleshooting Tip: NTLM authentication failure (...

Re: Error trying to install FortiClient 7.2.1 on s...

Re: Unable to connect to my Radius Server . Test c...

Re: Unable to connect to my Radius Server . Test c...

KCS