Does anyone know of ruggedized APs that are rated for Zone1-Zone21
Occasional Danger Zone(Gas and Dust Accidents)?We use the ruggedized
234F but I dont see any rating for ATEX zones on it. Is there another
model or is the 234F rated for ATEX zone-Occ...
Are there any specific commands that I can run on a FortiGate to check
the following parameters of the FortiAPs associated with the FG:Number
of APs associatedNumber of SSIDsNumber of Users/devices connected per
SSIDTotal Number of Clients
I am trying to find a generated heat value of switch models 124F-POE and
148F-POE in kW.I only seem to find the operating temperature and not the
amount of heat generated by these devices.Does anyone know where I can
find this?
I have 231Fs FortiAPs that show offline and disconnected to the FG.They
have been assigned the right vlan with all the recommended settings by
Fortinet.They are not able to attain an IP address even though there are
other devices on the FortiSwitch w...
I am having an issue with FAP 231F, they are showing
offline/disconnected. They are connected to a FortiSwitch and have VLAN
for AP assigned to them. They are not attaining an IP from the FG as
well, the DHCP server is working fine as there are other...
I dont know if I will be able to use SNMP as the VLAN we are using for
the APs is not being routed/advertised.And I dont seem to find a
document which provides these queries by using the SNMP polling to the
FG rather than the APs.If there is a docume...
We plan to query the Fortigate for this information rather than the
FMG.But , I am curious as to how would I do it through the FMG and query
it through there for our internal monitoring teams
Hello, Sorry I've been away. But this issue turned out to be a weird
physical port connection which would erratically work. The device has
been replaced and the issue has been resolved.
Hello everyone, Sorry I've been away. But this issue turned out to be a
weird physical port connectivity which would erratically work. The
device has been replaced and the issue has been resolved.
Yes, its not getting an IP and the DHCP has been set for the AP vlan.
The APs just dont request an IP from the FG.what do you mean by on the
actual physical interface?
