Hello together,
I'm trying to get my Fortigates registered via LLDP in my Switches.
This works perfectly on two FGT-50E, currently on 5.4.1.
It does not work on 3x FGT-90D and on one 110C. These are all on 5.4.somewhat firmware.
What I did:
edit "internal14"
set vdom "root"
set type physical
set device-identification enable
set lldp-transmission enable
next
and:
config system global
set lldp-transmission enable
end
Then:
diag lldpx restart
We use HP ProCurve switches.
Any idea?
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Good news:
"This issue got resolved in code, a fix will be provided in he upcoming FortiOS releases end of Q2. FortiOS version 5.4.5 is scheduled for around end of May 2017, 5.6.1 for around end of June. Please note that these estimated release dates are still subject to change. As soon as the release dates are fixed we'll update this ticket. "
What 's does FTNT support say the correction will come and was it impacting all port types?
Ken
PCNSE
NSE
StrongSwan
Good news:
"This issue got resolved in code, a fix will be provided in he upcoming FortiOS releases end of Q2. FortiOS version 5.4.5 is scheduled for around end of May 2017, 5.6.1 for around end of June. Please note that these estimated release dates are still subject to change. As soon as the release dates are fixed we'll update this ticket. "
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1590 | |
1038 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.