Hi, i have noticed an update issue for the FortiClient 5.2.6
(win7/64bit).Windows said that the database is old. Have checked the
database on the FC and it say that it is up to date.Have then run a
Diagnostic Check with the Fc-Tools.and checked the s...
Hi, is it possible to use DDNS in FortiOs 5 (5.2.7) without using
Fortigurd Servers in DNS Settings?Unfortunately the DDNS Settings will
only be displayed and usable when I have choosen "use Fortiguard
Servers". The problem is that the FG DNS Servers...
Hi, at first a happy new year to all. I have a Problem when i enable ssl
deep-Inspection and surfing through the Web. I noticed that some sites
loading only if i reload the site twice. Sometimes but not often I get a
"ssl_error_bad_mac_read" error in...
Is the FGT60D V 5.2.5 capable to scan antivirus in https? I don't see
any hints in the Antivirus Profile which point this out. When i take
Proxy mode i see only the standard protocols but no https for example.
In other words how can I see if FGT 60D ...
Hi, I have some trouble with DHCP for the secondary IP on the internal
Interface. So far as I could read it seems that the DHCP-Server only
listen for request at the main IP but not on the secondary. My Device is
the FG/60D with V5.2.5 Does the scope...
Small Update. Today on 7th Febr 2020 20:48 MESZ i got an Update to
AV_SIG:74.00884 (from AV_SIG:74.00883). The Windows Message with an old
AV-Database has disapeared. I ran then again the above dignostic check
with the same results. Don't know what c...
Hi Steve, look at these
thread:https://forum.fortinet.com/tm.aspx?m=172989 Since 6.2 the
Forticlient seems does not have the 10 free Licence on a Fortigate
device anymore.They have some licensing changes you can read
here.https://docs.fortinet.com/do...
The upgrade path is designed to have a valid config so that the device
will work. On every update the config will be modified if necessary. In
your case the only way is to reset the device to the factory settings by
formatting the device. This can be...
I hope you know that there exitst upgrade paths?You cannot jump from one
Version to another.If you read the part "Upgrading to FortiOs 5.4.2" in
the Release Notesyou will see that you must have 5.2.8 or later to
upgrade to 5.4.2 In your case you must...
I have upgraded my FWF60D since a few weeks to 5.2.13 and so far no
problems at the time. The FGT60D is still pending and will be upgraded
in a few days.
