Dear EveryoneI recently bought and old fortigate 61E on ebay, i capture
the serial number and the image of the product and sent to customer
service to ask for device transfer, but they said that they do not
support product that not bought from author...
Dear everyone.I have configured my network to use Ipv6 as detail below,
it work ok, this configure allow client pc connected to LAN interface
can connect to internet using ipv6 OK with ipv6 from DHCP6 server.But
the problem is if the pppoe is reconne...
Dear BrothersI have a draytek router vigor 2962 behind a fortigate ,
Fortigate conmected to internet using pppoe, draytek establish an ipsec
tunnel to another fortigate (not behind NAT) of remote site, the vpn is
connect OK, but the traffic is very s...
My company use fortinet devices for years with anually subscription. I
need to register a basic FNDN account to research the fortinet rest api
documents. The problem is to register account here you must have two
fortinet employee email as sponsors.I ...
omg, today i met the same problemmy fortigate LAN interface is
configured as hardware switch, and ZTE mesh wifi cannot discover each
other if they are connect directly to fortigate LAN ports, the bold line
is custom configuration, but this does not h...
Hi brotherDoes the pre-owner have to access my device to transfer this
or he just do this on his fortinet account? I gave him the firewall
admin information and he may not want to logon to my device for some
reason.Thanks
Hi StephenI have aready created a TAC support but they cant help:"I
found that ISP will reset IP after a time, this is automation and
doesn't cause this issue. Due to you test manually , IPv6 will not
enough time for releasing.You should find solutio...
Thanks StephenMy case is different from himMy client ipv6 work well
until the pppoe reconnect and new ipv6 assigned from DHCP6 serverI found
that if reduce the lease time of dhcpv6 from fortigate to a very short
time about 15-30 min config will tempo...
i dont look the details on your schema, but in this cannot ping from
your PC to your router at the end, most case is miss the routing, you
should create a static route on the router to make it understand if it
want to connect to the network 10.0.1.10...
