Description This article describes how to block internet access for
single or multiple hosts using the IPv4 deny policy. Scope FortiGate.
Solution Go to Policy & Objects -> Addresses and select Create New
Address: An address called '192.168.1.55/32' ...
Description This article explains the workaround to process if the DHCP
is enabled on both FortiGates in the VRRP cluster. Scope FortiGate.
Solution When FortiGate is on a VRRP cluster with another FortiGate (or
other device that supports VRRP) it me...
Description This article describes how to configure FortiGate DNS over
TLS using Cloudflare DNS. Cloudflare DNS: Primary DNS 1.1.1.2 Secondary
DNS 1.0.0.1 Scope From GUI: From CLI:# config system dns set primary
1.1.1.2 set secondary 1.0.0.1 set prot...
Hi Xenitel,I think you can create a script to import the IP addresses to
your fortigate. You can try this:config firewall addressedit "X" <--
nameset subnet x.x.x.x x.x.x.x <- enter the ip address or subnetnext
edit "y"set subnet y.y.y.y y.y.y.y next...
Hi Firasbg,Traffic flow is
like:->->->Try to configure VIP
in the fortigate to forward SSH traffic from outside to internal
VM.KB:https://community.fortinet.com/t5/FortiGate/Technical-Tip-Virtual-IP-VIP-port-forwarding-configuration/ta-p/198143
t_krawaczynski,It should be in the GUI:Policy&objects>Internet Service
Database> Create
NewKB:https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-create-internet-service-database-based-on/ta-p/194297