I have created many custom event handlers in FortiAnalyzer that send an
email with the event details. I am looking to customize the email alerts
that are sent out to make it easier to receive particular alerts on a
mobile device, get rid of the extra...
I can not see your image to tell what is happening, but you may need to
adjust the port setup on the 70F, as they default to an internal
software switch with all ports assigned. This might need to be cleared
out so you can reuse those ports in your c...
I have seen some ISPs have issues where even though the MTU was
negotiated, there was an issue downstream causing packet loss. You can
test by adjusting the TCP MSS values to something lower on a test
firewall policy to see if that fixes your issue:
...
Do you require all the vlans in HQ1, HQ2 and Building3 to be layer-2 of
eachother, or could they all be routed? Building 3 is also supposed to
be layer-2?
One option would be to put the firewall inline using virtual wire pair,
it will inspect the traffic as it passes through but does not do any
routing, etc. The second, would be to put the public ips on the firewall
and then create a /30 or similar net...
