Hello Guys, I am facing issue while creating the SSID in tunnel mode for
radius authentication. My all bridge mode SSID were unable to connect.
Kindly suggest on this.
Hi Guys, I have configured SDWAN for load balancing the video stream
traffic & I am using source-ip in implicit rule for load balance in
SDWAN. But as checked the utilization it was not equal on both the ISP
links. Kindly let me know how video/voice ...
Hi guys, We have configured port5 in HA as path monitoring. There is a
failover happened & checked that link monitor is showing dead in
secondary firewall which was primary before failover. The Server IP is
reachable but link monitor is not coming up...
Hi Guys, I have an architecture where ISP is directly connected ISP-sw1
& then from there one cable goes to Primary firewall & second cable goes
to secondary firewall.Same I have secondary ISP link and is connected to
ISP-sw2 & then from there one ca...
Hi,I am using FG 800C and which having 5.6 FortiOS. In this version the
export option is not available. And also this is the last version of
this product. Any other suggestion
Hi, We have a existing TAC case for the same and executed the commands
as you mentioned. But till now there is no resolution. Any suggestion
would be helpful for us from your side. Is there anything that we can
check on the endpoint system.