Hi all, we have recent connectiosn issues the last days at our customers
with Apple iOS devices . I found out, that iOS Clients with updated
Forticient 7.4.10145 has the issue. After some test with try and error i
found out, that you have to specify ...
Hello,i'm relatively new to using fortimanager.I need to get the IPs
from the "Remote Host" entry in the ssl monitor and use it dynamically
in a policy. I can see the IP on the CLI via "execute vpn sslvpn list"
or in the fortimanager at VPN Manager -...
Man, thank you!! I habe been locking over and over again to fix this
behavior on different FGTs every time it appears somewhere. My solutions
was to revert the dial-in site to the other location if it was possible
...
We have a similar Problem here: We couldn't get an ipsec tunnel working
with a remote juniper on an fgt with v7.4.7. The tunnel ist getting up,
shown pahse 1+2 online, we can send traffic through the tunnel (tx is
shown also on the interface), but ge...
HI Suraj, i don't need continuous monitor. It will be acceptable to get
the information on a specific time (e.g. at 8:00 a.m.) und use these IPS
for a policy. If it is not working to get the information from the web
ssl log-in, i may can use a websit...
The users could connect via Webinterface to SSL, but are not able to
install the client. Because of that they can't use the native RDP
Client, only the Web RDP Client from Fortigate. But the html rdp Client
does not meet the quality requirements. The...
You are leaving our website
You are leaving our site and we cannot be held responsible for the content of external websites