Re: Check Available Firmware Updates From CLI/SSH

carlosaleman · 11-01-2023

Description This article describes how to convert an image to a BASE64 string for replacement messages. Scope FortiGate. Solution Images must be converted into a BASE64 string before they can be used in FortiGate replacement messages. Different publi...

carlosaleman · 10-31-2023

Description This article describes how to find an alternate upgrade path if the upgrade path recommended by the FortiGate upgrade tool is not applicable. Scope FortiGate. Solution It is always recommended to follow the upgrade path recommended by the...

carlosaleman · 10-25-2023

Description This article describes how to block the IGMP protocol using a local in policy. Scope FortiGate 6.0 and above. Solution If it is necessary to block a specific protocol when it reaches a FortiGate interface without needing to know the port ...

carlosaleman · 10-24-2023

Description This article describes how to create a SIP helper for custom ports. Scope FortiGate 6.x and later. Solution If there is a VoIP solution that needs a custom port, and it is desired to use SIP session-helper instead of the recommended SIP-A...

carlosaleman · 10-22-2023

Description This article describes how to get the channel ID for video filtering. Scope FortiGate 7.0 and above. Solution YouTube has implemented an easy but a bit hidden way to get a channel ID: Go to the About tab. Select the share button (arrow ic...

carlosaleman · 11-08-2023

This is awesome, thank you!.

carlosaleman · 10-27-2023

@asda I can't tell you exact details, but I can confirm that this output mostly indicates that there was not only an error in committing the table entry, but that the entry could not be deleted. Regards

carlosaleman · 10-26-2023

@francoma I'm glad to know it worked. Just to add a bit of background to the scenario, you can get more details about how the SIP ALG has changed in different versions in this link: https://community.fortinet.com/t5/FortiGate/Technical-Tip-Changes-in...

carlosaleman · 10-25-2023

@francoma If your policy is in flow mode, try changing it to proxy mode and test. Regards.

carlosaleman · 10-20-2023

Hi @Yesolo , just to clarify, "local in" policies are used for traffic that has as destination the interface itself, not for traffic that will flow through the fortigate, or if you want to see it differently, traffic that has an incoming and an outgo...

User Statistics

User Activity

Technical Tip: How to convert an image to a BASE64 string for replacement messages

Technical Tip: How to find an alternate upgrade path

Technical Tip: How to block the IGMP protocol using a local in policy

Technical Tip: How to create SIP helper for custom ports

Technical Tip: Get the channel ID for video filtering

Re: FortiGate WebUI Tools > IPsec VPN debug

Re: What do these two errors mean

Re: VoIP profile is not visible on Firewall rule

Re: VoIP profile is not visible on Firewall rule

Re: Custmized local in policy doesn't work

Re: Check Available Firmware Updates From CLI/SSH

Technical Tip: How to find an alternate upgrade pa...

Re: FortiGate WebUI Tools > IPsec VPN debug

Re: What do these two errors mean

Technical Tip: How to use 'diagnose sys cmdb info'...

Re: VoIP profile is not visible on Firewall rule

Re: Unable to connect Fortiguard Servers

KCS