There were multiple conversations at this community about this subject
on both sides: "should work" and " not supported".I just found the
culprit when my new phase1-interface configuration of this dialup IKEv2
over TCP on FG60F 7.4.9 didn't work with...
We just got FortiCloud Premium license to manage our customer's FTNT
cloud services like EMS Cloud under our master account/org. But I'm
struggling to set those customers under "Organizations". Originally I
thought we would have to create an Sub-OU p...
Does anybody know the reason why it skipped 7.x.x and jumped from 6.6.x
to 8.0.0?And, most importantly what is the major change with this new
version in the software structure compared to any 6.6.xs? What's new
section in the release notes doesn't in...
I saw some conversation about stopping auto-upgrade on FGTs before after
7.2.8. And, we're doing it manually for those FGTs that are NOT managed
by FMG. Then when we tried the same for those managed by FMG, the change
was rejected because it's manage...
This version of FMG was released last week and now CVE-2024-47575 is
released as well.https://www.fortiguard.com/psirt/FG-IR-24-423However,
the release notes doesn't have anything in the resolved issue section.
Does this actually have the vulnerabili...
As you just said that fail-over from SJC to VA failover is done by BGP
through/inside of Lumen MPLS network. And those routes should be
advertised to each locations over BGP. When both fail, those BGP routes
should disappear from the MPLS advertsed r...
I'm not trying to discourage you from utilizing firmware templates. But
even with those various nice ways to manage by spending much time to set
them up as you want, in reality if you run 10 upgrades for 10 devices at
the same time, at least one or t...
You said "route directly to the RingCentral data centers". Did you mean
there is a direct VPN from Lumen MPLS network into RC datacenters? If
that's the case changing path to over the internet might not work. It's
a question to RingCentral, first.If ...
1. router ID is not bound to any hardware. You just name it whatever you
want. You just want to make it unique in your BGP network.2. if you
search through the internet, you would find like this easilly.
https://docs.fortinet.com/document/fortigate/7...
Yes. When multi-vdom is NOT set, everything you see and configure are in
root vdom but the vdom name is hidden. So, when you enable multi-vdom,
you see everything, except for those global stuff like interfaces,
system admin, system DNS, SMTP, etc., i...
