Re: Fortiweb 7.6.0 WAF | Update should be needed f...

opetr_FTNT · 08-13-2024

Description This article explains the mechanism of FortiWeb traffic log, including the meaning of response code 0 Scope FortiWeb. Topology FortiWeb. Solution Diagram: Client ---- FortiWeb (WAF) ---- Real Server (RS). The mechanism of the FortiWeb tra...

opetr_FTNT · 01-17-2024

Description This article describes how to configure and troubleshoot FortiWeb packet header details forwarding to FortiAnalyzer. Scope FortiWeb. Solution Configuration: To forward the below Packet Header information to FortiAnalyzer. Enable traffic p...

opetr_FTNT · 08-16-2022

Description This article describes the message 'The number of enabled hardware-ssl process is exceed the limit'. Scope FortiADC-400F. Solution This error message is related to limit of HTTPS VS with hardware acceleration enabled. The limit is differe...

opetr_FTNT · 08-15-2022

Description This article describes about an issue when FortiDDoS is upgraded to 5.5.1 or 5.6.1v. FortiDDoS B/E series firmware upgrade to 5.5.1 or 5.6.1 from Releases below 5.5.1 may reset the admin password to null (no password like the initial syst...

opetr_FTNT · 11-24-2021

Description This article provides guidance on how to address the commonly seen items in a security audit report (in the outcome of a VAPT scan). Scope FortiWeb. Solution Table of Contents. Cookies: SameSite Flag Not Used. Cookies: Secure Flag Not Use...

opetr_FTNT · 12-04-2024

Hello Sai K, Please see below - 1. Is there any update or roadmap from Fortinet to introduce separate threshold settings for single vs. shared IPs in future releases? I'm not aware of any such plan for future releases. 2. Are there any best practices...

opetr_FTNT · 10-04-2023

Hello @Akmostafa , In the TI (Transparent Inspection) mode the FortiWeb doesn't act as proxy, it only inspects the traffic that flows through it. If it detects violation of configured security policy it attempts to terminate the TCP session by sendin...

opetr_FTNT · 11-23-2022

You're welcome. As per my understanding, the RAM size itself doesn't tell much about the unit's processing capabilities, hence is not part of data sheet. I think Fortinet Partners should be able to provide the info. https://partnerportal.fortinet.com...

opetr_FTNT · 11-23-2022

Hi bigneo7, Please see the 'noparse' option under server policy settings in CLI. https://docs.fortinet.com/document/fortiweb/7.0.3/cli-reference/338812/server-policy-policy#config_1208537978_3925198 Or you can use the firewall feature, instead of con...

opetr_FTNT · 11-23-2022

Hi Mogesbk, The FWB3000E has 32GB RAM.   Regards, Ondrej

User Statistics

User Activity

Technical Tip: Response Code 0 found in Traffic Log

Troubleshooting Tip: FortiWeb packet header details forwarding to FortiAnalyzer

Technical Tip: FortiADC message 'the number of enabled hardware-ssl process is exceed the limit'

Technical Tip: FortiDDoS Upgrade to 5.5.1 or 5.6.1 may delete Admin password

Technical Tip: Addressing common security audit report items

Re: Fortiweb 7.6.0 WAF | Update should be needed for threshold based policies

Re: SSL inspection/offloading in different deployment modes

Re: RAM for FWB-3000E

Re: FortiWeb pass through policy

Re: RAM for FWB-3000E

Re: Fortiweb 7.6.0 WAF | Update should be needed f...

Technical Tip: Addressing common security audit re...

Troubleshooting Tip: FortiWeb packet header detail...

Technical Tip: FortiADC message 'the number of ena...

Technical Tip: FortiDDoS Upgrade to 5.5.1 or 5.6.1...

Fortinet Training Institute

KCS