Hi all,We want to do license registration for FortiAnalyzer using
fmupdate from cli . We don't have internet access and from FortiAnalyzer
GUI , it didn't allow to continue ad it's not register yet.Our scp
server is solarwinds scp server. Is the belo...
Hi we want to upgrade FortiManager from v6.2.9 to v6.4.11 and
FortiAnalyzer from 6.2.9 to v7.0.7.But from support portal we cannot
check like we usually check for FortiGate device. For FortiManager
according to this
linkhttps://docs.fortinet.com/docu...
Hi All,We're using VDOMs in our FortiGate Firewalls.FortiGate is running
HA and using Dedicated Management interface for Active and Standby
Node.Dedicated Management subnets have no internet access.The root VDOM,
we didn’t configure anything and leav...
Hi all, I just want to confirm about the command "diagnose debug
enable".If I enabled "diag debug enable" command in Fortigate it will
only enabled only for 30 min or it will run as long as I don't reset or
manually disable the debug?Also , after I r...
Hi All , We've FortiGate Firewalls running Active-Passive HA. We've
enabled VDOMs and root VDOM is the management VDOM.We have local NTP
server. But FortiGate time is not syncing with local NTP server.
FGT-INR03 (global) # execute timecurrent time is...
Hello,thank you for your suggestion.Yes, same version, same model, same
FortiGate box backup config file from the same Firewall and then restore
into same firewall , the alert still appear .Also upgraded the firmware
and test again on the same box , ...
We are using the exported config from converter. We even tried export
blank config from 201F itself and restored the 201F blank config to the
unit , still showing the alert even for the same model /same
version.Other than showing the alert , there is...