Description This article describes basic steps to confirm whether the
hardware platform has reached its limits. Scope FortiAnalyzer,
FortiManager with FortiAnalyzer features. Solution To review the overall
state of the HW platform, run the following ...
Description This article describes how to troubleshoot the playbooks in
FortiAnalyzer. Scope FortiAnalyzer v7.2+. Solution To create a playbook,
follow this KB article: Technical Tip : How to create a custom playbook
using an event handler and creati...
Description This article describes how to set up an event handler
triggered by a specific size of sent or received bytes. Scope
FortiAnalyzer. Solution In FortiAnalyzer, go to Incidents & Events ->
Event Handlers -> Basic Handlers -> Create New. Conf...
Description This article describes how to view the TCL script results.
Scope FortiManager. Solution The TCL scripts can be enabled on
FortiManager with the following CLI setting: config system admin setting
set show_tcl_script {enable | disable - def...
Description This article outlines the minimum requirements,
configuration steps, and recommendations for setting up FortiAnalyzer.
It also provides links to resources that will assist and guide you
through the initial configuration process. Scope For...
Hi @DennisInfra , Please make the following setting under the CLI:
config fmupdate fds-settingset fortiguard-anycast enableend Please
assure that there is no restriction to the following sites at port 443:
https://docs.fortinet.com/document/fortimana...
Hi @boneyard , Try the following
change:https://docs.fortinet.com/document/fortianalyzer/7.6.2/cli-reference/368019/system-globalsearch-all-adoms
: disable (default)Best,