Description This article describes that it is not possible to edit
FortiGwitch ports. Scope FortiGate, FortiSwitch. NAC vs Static Mode
[FortiSwitch managed by FortiOS]. Solution When editing FortiSwitch
ports, if it is not possible to change the VLAN...
Description This article describes how to initiate a manual/automation
sync for SSO Groups. Scope FortiOS, FSSO. Solution After connecting the
external connector, if View User/Groups is selected, it is possible to
observe what groups are being passed...
Description This article describes how to resolve an LDAP Error 1
Message. Scope FortiGate. Solution Scenario:In some situations, the user
connects to an LDAP server successfully but user credentials fail, even
though a user is configured correctly. ...
Description This article describes how to address a BGP error message
that causes BGP to remain in IDLE. Scope FortiGate. Solution When
troubleshooting BGP neighbor relationship issues, it is possible to see
the following error message after running ...
Description This article describes how to verify FortiToken cloud
Connection/Contract Information/Token Balance. Scope FortiGate. Solution
Verify that the Forticloud server is connected by issuing the following
command: If the IP and port are returne...
Hello @jmccoppin ,Utilizing the trusted host feature or local-in policy
is recommended for your request.Please see the following article which
explains the setup in further detail:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-System-admi...
Hello @Marcos_FDS1012 ,Thank you for confirming connectivity. Can you
test by changing the email server port? In addition, can you collect the
alert mail debugs as referenced in the first article?Kind Regards,
Hello @Marcos_FDS1012 ,If you are not receiving emails, please follow
the below document for the steps to follow when
troubleshooting:https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-Email-alert/ta-p/199344For
the "From" field, can you...
Hello @aidnet , Please refer to the BGP section for troubleshooting
below:https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-FortiOS-routing-RIP-OSPF-BGP-static-routes/ta-p/198593Generally,
the first step is verifying packets over port 1...
Hello @DerekWSmall,Arp-timeout value is a value that can be set on the
Fortiswitch per the documentation. Can you please provide the link
stating this command is possible for the Fortigate?Kind Regards,