Hello team kindly helpi am configuring site-to-site IPSEC on
fortimanager to push on fortigate but the i am confused where to
confgure the IPsec?i have tried to my best on all platform1. on VPN
Manager2. on IPsec Template3. on the device phase1 and p...
Hello team how to make the two interface to be best path i want each
interface to carry different traffic but it canot work beacause the
other interface is not best path
hello team i am getting probe failed when i adding fortiAnalyzer to
FortiManger, i have configured the FortiAnalyzer interface to be managed
with fortimanager
hello team we found the solution1. there is a filter in our BGP which
lets the BGP not form2. the interface used in VPN tunnel is wrong, so we
changed the interface3. the pre-shared key for the VPN does not match so
we changed
Hello Team we found the Solution ,The solution is we were not advertise
the LAN network that is why the branch did not see the network so we use
Default route originate command to advertise the LAN network and it
works
The underlay network is ok, HQ and Branch FW can ping each other.But on
the Branch FW you cannot see the LAN network from the Branch if you run
get router info routing-table all.but in the HQ if you run get router
info routing-table all, you can see ...
the underlay network is ok, HQ and Branch FW can ping each other.But on
the Branch FW you cannot see the LAN network from the Branch if you run
get router info routing-table all.but in the HQ if you run get router
info routing-table all, you can see ...
