Re: Fortigate crash

maulishshah · 05-03-2024

Description This article describes why the Dynamic VLAN assignment feature gets disabled Scope FortiGate, SSID. Solution By default, the Dynamic VLAN assignment is disabled. This feature is useful when users need to change the VLAN automatically afte...

maulishshah · 01-28-2024

Description This article describes how to view VoIP profiles in UTM features of the GUI. Scope FortiGate. Solution By default, the Firewall policy operates in Flow-based inspection mode, and due to this reason, the firewall fails to display the VoIP ...

maulishshah · 01-17-2024

Description This article describes how to make it possible to configure SAML on FortiClient. Scope FortiGate, FortiClient. Solution To enable SAML authentication, it is necessary to enable the SSO feature from the FortiClient settings first. Select t...

maulishshah · 01-03-2024

Description This article describes how to write a script to update FQDN IPs frequently. Scope FortiGate. Solution To update the IP addresses associated with a specific FQDN regularly, run the following script. This script facilitates the periodic upd...

maulishshah · 12-05-2023

Description This article describes why BGP peer withdrawn prefixes from the routing table. Scope FortiGate, BGP. Solution If the BGP has a route missing in the routing table, it is necessary to run the following commands to collect the logs: diagnose...

maulishshah · 03-30-2024

Hi @owall, Could you kindly confirm whether you are connecting to FortiClient or using the SSL Web mode? If you connecting the FortiClient, please enable commands on FortiGate CLI below before establishing the RDP connection di de reset di de flow fi...

maulishshah · 03-30-2024

Hello @fortimaster, Could you kindly provide the configuration details for the IPsec dial-up tunnel? Furthermore, could you confirm whether the tunnel goes down frequently at specific intervals or randomly? Also, could you specify whether the issue i...

maulishshah · 03-09-2024

Hi @osamaoj, Could you please provide the reference ticket to verify the case history? Thank you.

maulishshah · 01-24-2024

@andybarker, could you please share your Fortinet Case number to get more information? Thank you.

maulishshah · 01-24-2024

@wendelin, can you please confirm if are you still on version 7.4.2? If yes, could you please disable the npu-offloading on the affected phase2 and monitor whether the issue persist config vpn ipsec phase2-interface edit set npu-offload disable end ...

User Statistics

User Activity

Troubleshooting Tip: Dynamic VLAN assignment feature gets disabled automatically in SSID

Technical Tip: VOIP Profile missing on GUI or UTM Profile

Technical Tip: How to enable SAML configuration on FortiClient

Technical Tip: Automation Script to update FQDN frequently

Technical Tip: BGP Prefix Withdrawn entries in BGP logs

Re: RDP connection via ssl vpn

Re: Dial Up Ipsec Tunnel goes down

Re: Fortigate crash

Re: FortiOS 7.4.2 Bug Causes IPsec VPN Tunnel Phase 2 Instability

Re: FortiOS 7.4.2 Bug Causes IPsec VPN Tunnel Phase 2 Instability

Re: Fortigate crash

Re: FortiOS 7.4.2 Bug Causes IPsec VPN Tunnel Phas...

Re: FortiOS 7.4.2 Bug Causes IPsec VPN Tunnel Phas...

Technical Tip: Automation Script to update FQDN f...

Re: tunnel interface is not getting disable

Re: Ping WAN IP from LAN

Re: Firewall policy denying all traffic question

Re: Passive FTP Outbound Connection issue

Re: cannot ping or http after configuring sdwan st...

KCS