Re: Fortigate crash

maulishshah · 12-04-2024

Description This article describes how to delete an External Domain Name threat feed when it has no reference. Scope FortiGate. Solution To delete the Domain Name External threat feed, select Security Fabric -> External Connectors. Right-click on the...

maulishshah · 11-27-2024

Description This article describes what configuration changes are required to distribute IPSEC traffic across multiple CPU cores. Scope FortiGate VM. Solution For VM configuration, it is necessary to follow the following configuration.First, understa...

maulishshah · 10-28-2024

Description This article describes how to confirm what ports are open for smtp.office365.com. Scope FortiGate. Solution To identify whether the specific port is open or not, make sure the IP address is resolved for a particular FQDN. Below is an exam...

maulishshah · 10-24-2024

Description This article describes how to identify what POP connecting by nslookup Scope FortiSASE. Solution Identifying the POP location first requires obtaining the domain name of the FortiSASE Here are the steps to obtain a domain name: Login to F...

maulishshah · 09-24-2024

Description This article describes how to troubleshoot the IPSec SAML Dial-up tunnel if it fails to connect. Scope FortiGate, FortiClient. Solution For initial deployment, review this KB article: Technical Tip: How to configure Microsoft Entra ID SAM...

maulishshah · 11-15-2024

Hi @melkool , Can you please make the following change, under the XML config for the SSL VPN tunnel, try to find a tag called and change the value from 0 to 1. Let us know if that fixes the issue for you. Thank you.

maulishshah · 11-09-2024

Hi @JasonX , Can you please provide the configuration of VIP and ports that need to be open for Cameras through the mobile application? Also, need to verify the NAT is enabled on the policy or not? If Nat is disabled, please run the following command...

maulishshah · 11-06-2024

Hi, The best you can open a support case and the engineer will take control to check pcap to verify what would be the reason with LDAPs or LDAP. Or You can run pcap for host 192.168.1.1 Here is the KB article to run wireshark logs: https://community....

maulishshah · 11-06-2024

Hi, Can you please provide the configuration of LDAP server? show user ldap

maulishshah · 11-05-2024

Hello @locaol , Can you please follow this article to identify the reason? https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-FortiGate-LDAP-troubleshooting-and-debug/ta-p/196280 Please run the following commands to identify what could b...

User Statistics

User Activity

Technical Tip: How to delete External Domain Name threat feed

Technical Tip: How to distribute IPsec traffic across all CPU Cores in FortiGate VM

Technical Tip: How to identify port 587 is open for smtp.office365.com

Technical Tip: How to identify what PoP location by Nslookup

Technical Tip: Troubleshoot IPsec SAML Dial UP tunnel

Re: FortiEMS and AutoConnect/AlwaysUP

Re: Open ports for CCTV system Mobile app access

Re: Trouble with LDAP authentication

Re: Trouble with LDAP authentication

Re: Trouble with LDAP authentication

Re: Fortigate crash

Re: FortiOS 7.4.2 Bug Causes IPsec VPN Tunnel Phas...

Re: FortiOS 7.4.2 Bug Causes IPsec VPN Tunnel Phas...

Technical Tip: Automation Script to update FQDN f...

Re: tunnel interface is not getting disable

Re: Ping WAN IP from LAN

Re: Firewall policy denying all traffic question

Re: Passive FTP Outbound Connection issue

Re: cannot ping or http after configuring sdwan st...

KCS