Re: Fortimanager VM connect fortigate error

Hsharma · 10-04-2024

Description This article describes a solution for users who are unable to connect to the SSL VPN due to PKI authentication failure. If users are unable to authenticate with PKI authentication and observe certificate check error failed in debugs. Scop...

Hsharma · 08-27-2024

Description This article describes the case when VLAN pooling option is greyed out on SSID due to the warning 'VLAN Pooling is unavailable when Dynamic-VLAN option is enabled'. Scope FortiGate. Solution If Dynamic VLAN assignment is enabled, VLAN poo...

Hsharma · 08-19-2024

Description This article describes how to check AS path information sent by the firewall to the BGP neighbor in Wireshark. Scope FortiGate. Solution FortiGate sends AS PATH to the BGP neighbor. Sometimes firewall does not represent the accurate AS PA...

Hsharma · 08-08-2024

Description This article describes the impact of Changing the MTU value of an aggregate interface. Scope FortiGate. Solution If there are two or three interfaces are part of the aggregate interface, so changing the MTU value of the aggregate interfac...

Hsharma · 05-05-2024

Description This article explains that the firewalls are out of sync status due to differences in the interface configuration settings speed as auto and how it should be resolved. Scope FortiGate. Solution The firewalls are out of sync due to mismatc...

Hsharma · 09-23-2024

Hello , Please check the compatibility tool between Fortigate and Fortimanager . They seems to be non-compatible version. Kindly try to make the version compatible to each other and see that helps. Please use the link to check the compatibility betwe...

Hsharma · 09-23-2024

Hello Umesh, You can check the application profile logs to see if that application is getting block by the firewall or not. If the logs are present in security profile logs , try to find which signature it is blocking and try to allow that signature ...

Hsharma · 09-04-2024

Hi, You also have to check ,if the destination route is printed in the routeprint output on the device connected to the vpn . If Routes are not present in the routeprint output then might be split tunneling is enabled and you might need to add the de...

Hsharma · 09-04-2024

Once you configured the Static URL filter to block , To verify the URL has been unblocked or not you would need to test in incognito window instead of regular window of the browser . Or you can go to the fortigate logs and report---> webfilter--->fil...

User Statistics

User Activity

Technical Tip: Unable to connect to SSL VPN due to 'Certificate check error failed'

Technical Tip: VLAN Pooling is unavailable when Dynamic-VLAN option is enabled

Technical Tip: Checking AS path information in Wireshark

Technical Tip: Changing the MTU value of an aggregate interface

HA Out of Sync due to speed auto in default setting

Re: Fortimanager VM connect fortigate error

Re: Viber appliaction not working through in Forti SDWAN/ how we can bypass the traffic for viber

Re: SSLVPN traffic FGT1 unable to communicate FGT2

Re: how to unblocked a website from FortiGuard

Re: Fortimanager VM connect fortigate error

Re: Viber appliaction not working through in Forti...

Re: SSLVPN traffic FGT1 unable to communicate FGT2

Troubleshooting Tip: SNMP connection failed due to...

Technical Tip: MAC OS -14/15 host-check option una...

KCS