Description This article describes the reasons why an IPsec tunnel does
not show as 'up' and instead receives the IKE error 'no policy
configured'. Scope FortiGate. Solution When running the IKE debug for
IPsec VPN, the following error can appear: ik...
Description This article describes the solution for the error
'Virtualized Intel VT-XEPT is not supported on this platform' that may
appear while running a FortiGate VM. Scope FortiGate VM. Solution When
starting up a VM FortiGate, the error 'Virtual...
Description This article describes one of the possible reasons for a
P1_Retransmit of an IPsec tunnel with Pfsense. Scope FortiGate and
Pfsense. Solution When creating site-site Ipsec tunnel with a Pfsense
firewall, the phase 1 and IKE debug return t...
Description This article describes reasons why the client receives a
different DHCP scope. Scope FortiGate and Windows. Solution On
FortiGate, there are 2 different DHCP scopes which are port7 and vlan
70. The client host is intended to get the IP fr...
Description This article describes how to map a single external IP to an
internal IP range to circumvent the 'Invalid IPv4 address' error. Scope
FortiGate. Solution When creating a VIP to map a single external IP to
an internal IP range, the error 'I...
Hi @ck8882.,You can use link-monitor for this purposes. Please refer to
the following
documents:https://community.fortinet.com/t5/FortiGate/Technical-Tip-Combining-Remote-Link-Monitoring-with-FGCP-cluster/ta-p/191330https://community.fortinet.com/t5/...
Hi @tehm,When trying to unset update location, what is the FDS server IP
you are getting from debug? Please also try to run packet capture to see
if it may be MTU issue.Regards,