Description This article describes what needs to be verified from the
FortiConnect side when FortiConnect side logs show that Authentication
succeeded but the authorization policy has denied access. Scope
FortiConnect. Solution Wireless clients conne...
Description This article describes what is the max no of MAC addresses
can be added to the Mac filtering access list on the FortiWLC. Scope
FortiWLC, WLC GUI config, WLC CLI config, MAC filtering. Solution Max of
3000 MAC address entries can be added...
Description This article describes how to configure the FAPU321 & AP822
with the same BSSID for the SSID mapped to it. Scope FortiWLC, Forti AP
(AP8xx , FAPU), All firmware Solution In some cases, multiple AP models
in the environment can be seen, an...
Description This article describes the CONNMGR error log on the Forti
Extender and LTE is not working Scope FortiExtender 7.0.3, 7.2.1.
Solution - CONNMGR logs on the FortiExtender shows as follows. .[516
]CONNMGR :modem :agent_need_activate_sim:542 ...
Description This Article describes the command on the FortiAP CLI to
repeat a set of commands for specific number of times continuously.
Scope FortiAP. Solution - Login to the FortiAP CLI using SSH directly or
from the FortiGate CLI. - Execute the be...
Hi, -- Please make sure that the AP is able to ping the Fortigate Ip
address and vice versa. this is to confirm the communication is working
between the 2 x devices. -- If the AP and Fortigate are in different
subnet then UDP ports 5246 & 5247 has to...