So my HA setup now works. Details: 2 40F units on verizon DHCP
broadbandlan1 => LANlan2 => heartbeat (priority 200)lan3 => heartbeat
(priority 100)a => OOB mgmt (192.168.2.11 and 192.168.2.12 in vlan2)
interface monitoring set for lan1 and wan. I hav...
I'm a little confused about how this is supposed to work. I've found
multiple articles describing how to configure the master unit, most of
which (including the docs) tell me to reset the slave unit to factory
defaults, but then a couple of the artic...
The firewall in question is a 40F running v6.4.9. So the sessions widget
is saying: 'Current sessions: 402 CPU: 83.6% SPU: 0.0% nTurbo: 16.6%'
The CPU number seems awful high since there isn't much going on at the
moment. What has me confused: The 'C...
So, kinda new here. I wanted to block traffic inbound from, say, russia,
china and korea. I set up a firewall rule as wan/lan/GEO/all (where GEO
was the geographic list). No traffic. So I added another entry as a
whitelist from any US traffic, as a p...
Sorry if this is an FAQ - I've not seen any posts that answered this. I
currently have a vsphere VM running sophos-utm as an SMTP spam/av proxy,
and have become unhappy with the amount of junk that gets through. I've
heard good things about fortinet,...
This leads me to a related question. I have quite a few (30+) email
addresses I provide to external sites, many of which go to 2 actual
mailboxes on my mail server. The 'user aliases' feature on fortimail
seems to be exactly what I want, but the rese...
