Hey everyone, hoping for your inputs on this.From the title itself; we
have local users that are administrators for FortiAuthenticator GUI/CLI.
Tese local users have FTM attached/enable on them. We want to disable
Push notifications for these users; ...
I know this is an old thread, but for anyone finding this post. Make
sure the user your deleting is not logged in. You can't delete a logged
in user (despite you being a super_admin) You can further verify this by
deleting the user in CLI. It will sh...
Check your speed/duplex; there are cases in which auto-negotiation
between your Firewall/Router and the ISPs modem dont negotiate the
correct speed. Try hardcoding your speed and duplex. It could also point
to a faulty patch cord. Try replacing it.PS...
Thanks @Markus_M this is what I was afraid of. This honestly needs to be
a feature; one such scenario this is needed is push notif is only
enabled for users, but requiring admins of network devices to manually
code-in the OTP
Check the Fortinet Product Matrix. You should get a summary of AP
support for all models
therehttps://www.fortinet.com/content/dam/fortinet/assets/data-sheets/Fortinet_Product_Matrix.pdfLook
for: Max FortiAPs (Total / Tunnel)
Everything you're seeing there is normal. Dont be confused on the CPU
Utilization (in your case 1%) and the Session Utilization CPU. The
Session CPU your seeing is there (the 83.6%) means basically that 83.6%
of your total no. of sessions that is pro...
