Re: Slow / incomplete downloads from https://downl...

mclegg · 04-04-2017

DescriptionThis article explains how to create an elliptic curve certificate signing request.Solution1. Use the following CLI command to create the CSR using Elliptic Curve:exec vpn certificate local generate ec secp521r1 C ST C O U emailFor exampl...

mclegg · 03-15-2017

DescriptionThis article describes how to configure the LTE modem to connect to Deutsche Telekom.ScopeFWF-30E-3G4G v 5.4SolutionThe following steps can be used to configure the LTE modem.1) Put a micro SIM card in the SIM slot, the slot is on the left...

mclegg · 11-06-2024

6.4 has long term support, but only for customers with an Elite Forticare contract or higher:6.4 Long Term Support - Elite only

mclegg · 09-07-2023

Hi Rene, We are aware of the situation, however there is not much we can do about it. The problem is not with our servers, or indeed any ISP that we use, but with the peerings from Germany to USA which we are not responsible for. As you can see from ...

mclegg · 08-22-2022

One additional comment. You are using Lan2 and Lan3 as your HA ports, make sure that they are not part of the hardware switch that the default config comes with. Convert them to individual interfaces. See the best practices for HA here and the warnin...

User Statistics

User Activity

Technical Note: Generating an Elliptic Curve CSR

Technical Note: Configuring the LTE modem in the FortiWiFi 30E-3G4G

Re: FortiOS - End of Life Overview

Re: Slow / incomplete downloads from https://downloadservice.fortinet.com from Germany

Re: Sanity check on HA setup

Re: Slow / incomplete downloads from https://downl...

Fortinet Training Institute

KCS