After update to 5.4.4 on FAP221B and FAP321C the web console will not
load.Has it been removed or disabled??Cleared computer cache and it
still will not allow me to connect.I tried SSH, TELNET, HTTP and HTTPS..
none of them worked.
Good Morning All, I have recently had issues with A Digium SIP phone
system behind a Fortigate firewall. I searched around the internet but
did not find much that gave me any help. So, I thought I would post this
to try and help the community. Rememb...
I'm sure this is not the first post on this subject.I have a customer
who is using a well known cable modem provider in the U.S.A. Alabama
area. The Fortigate is a FGT60D and the traffic load is low. Firmware
5.2.7. Wth all UTM features turned on. Th...
The SYSLOG option has disappeared in the 40C. I am able to turn on the
service by issuing the following commands, config log syslogd settingset
status enableset server "This command is missing.." Has it
been moved to a different location?Thanks
Recently purchased two 800C' s with 10gig SFP' s. can' t figure out how
to get the two SFP+ ports 23 and 24 to come up wiith the 10gig
tranceivers. Anybody got any input? Thanks Tommy
Thanks Wanglei_FTNT that worked like a charm. I understand the security
side of things. In my case the radios/AP's are not accessible unless you
have the privilege to connect to the "MGMT" VLAN. Thanks for the update
though the really helped me.
OK, to clarify the firmware is FP320C-v5.4-build0354...The problem is
that all the remote software such as SSH, TELNET, HTTP, and HTTPS are
disabled during the update.I had to use a console cable to reenable the
HTTP option. I say this is a bad decis...
Thanks for the input, I had already tried disabling everything possible
without killing traffic flow and it did not make that much difference.
The provider switched out their modem and it helped a little but I still
believe there is a issue at layer ...
It appears that the logdisk option has been removed from the 60x all the
way up to the 100x models. I do not get any logdisk command options in
the 100D CLI command structure what so ever now.
