The issue is usually due to network connection. - Check whether the PC
is able to access the internet and reach VPN server on necessary port. -
Check whether correct remote Gateway and port is configured in
FortiClient settings.Regards,Rachel Gomez
Connection issues with your IP phone mean you’re unable to connect to
the SIP trunk server.Softphones which connect and run through a PC may
experience this from the computer’s firewall blocking the SIP traffic. A
SIP phone not connected to a PC may ...
ResolutionCheck lInk speed WAN interfaceTIP: Fig. 1. Optimizing the Link
Speed and MTU on the Advanced tab of the WAN interface where the
defaults fail to establish a compatible ISP connection.Check the MTU.A
mismatch in the maximum transmission unit...
To configure an automated SSL certificate in FortiClient EMS:Go to
System Settings > EMS Settings.Ensure that Remote HTTPS access and
Redirect HTTP request to HTTPS are enabled. Externally access EMS via
ports 80 and 443 is possible using the configu...
To configure a firewall:Go to Network Security > Firewall.Select [IPv4
Policy | IPv6 Policy].Click Add to display the configuration
editor.Complete the configuration as described in Table 66.Save the
configuration.Reorder rules, as necessary.Regards,...
